Discover
Manufacturing Culture Podcast
Manufacturing Culture Podcast
Author: Jim Mayer
Subscribed: 40Played: 863Subscribe
Share
© 2026 Jim Mayer
Description
Manufacturing is more than the products we make; it’s the people who make the parts. On The Manufacturing Culture Podcast, I sit down with leaders, innovators, and everyday heroes to uncover the stories behind their journeys in the industry. We talk about where they started, how they’ve grown, and the challenges they’ve overcome along the way.
Each episode brings a unique perspective; some practical, some inspiring, and all rooted in the human side of manufacturing. From lessons learned on the shop floor to big ideas shaping the future, it’s all about the people who make it happen.
Because at the heart of every company are the people who work there, and every person has a story.
Each episode brings a unique perspective; some practical, some inspiring, and all rooted in the human side of manufacturing. From lessons learned on the shop floor to big ideas shaping the future, it’s all about the people who make it happen.
Because at the heart of every company are the people who work there, and every person has a story.
184 Episodes
Reverse
In 1997, Paul Van Metre and a few friends opened a machine shop near Seattle straight out of college, with one machine and money from a second mortgage. Over 17 years that shop, ProCNC, grew to about 75 people, came back from the edge of bankruptcy after 9/11, and built its own software to run the floor. That software became ProShop ERP. Paul was one of the very first guests on the Manufacturing Culture Podcast, and three years later he's back with his first book, Precision Manufacturing, Precision Business: How the Best Machine Shops Turn Discipline into Profit.What sets Paul apart from other leaders is how plainly he owns his own mistakes. He was the machinist who could hold a part to a tenth and the owner who rode feast and famine cycles because no one was selling while everyone was making parts. He's the boss who once assumed people weren't trying hard enough, then learned he hadn't set them up to succeed. He built the book out of those lessons and the voices of about fifty shop owners and leaders he's interviewed on Machine Shop Mastery.Jim finally asks the question he's held for three years: where did the culture go? Paul answers that culture is the pillar everything else stands on. They talk about the one person deep problem and what it feels like to run a shop that depends on one person, why scrap almost always starts upstream, tough love as the space between family and team, the pride of putting fifty humble people in a book, and what makes Paul proud: hearing that his work changed someone's life.Key TakeawaysCulture is the foundation, not a chapter. Paul's book puts people, culture and standards in section four of five, and he says maybe it should have been part one. Without a good culture, people won't adopt systems, won't adhere to them and won't help make them better.Most shops run one person deep. The setup machinist, the estimator, the office manager, the person in shipping and receiving. If one of them took two weeks of vacation, Paul says, that part of the business would grind to a halt, and the fixes are not that hard and cost hardly any money.Retirements make it urgent. So many people in manufacturing are baby boomers who are retiring or about to. In Paul's words, the industry is "right in the meaty part of that retirement curve."Scrap usually starts upstream. On rare occasions a person causes the mistake, Paul says, but more often it's something they didn't have, a process that wasn't in place, or ambiguity. The owner's job is to make sure everyone downstream of a new order knows what good looks like.Hold a high bar and say you care. For the space between a family (love without accountability) and a team (accountability without always love), Paul's answer is tough love: "you can express deep caring for them and also expect a lot out of them."Chapters00:00 Welcome back: three years since Paul's first episode02:35 Icebreaker: Paul's life as a movie04:03 What culture means to Paul05:34 Why Paul wrote the book07:01 Where did the culture go?09:11 The one person deep problem10:49 Retirements and the one person problem11:30 Scrap is a process problem, not the machinist's fault13:18 Running a business with a machinist's precision15:27 Jim's own one person problem16:47 When to hand off a hat17:40 Love, accountability and tough love20:08 Paul's favorite part of writing the book21:38 What to act on Monday morning23:04 What makes Paul proud23:55 Signed copies, team orders and free copies24:47 Closing thoughtsFind PaulLinkedIn: Paul Van MetreBook: disciplinetoprofit.com Podcasts: host of Machine Shop MasteryCompany: proshoperp.com
Sam Thomason was seventeen, skinny as a rake, and brand new at a high school in Hakusan City, a mountain town in Ishikawa Prefecture with almost no English speakers, when his best friend asked him to join the sumo club. Sam told him to get lost. His friend asked if he was chicken. A week later Sam was standing in the ring.He'd been born in Japan, on the US Navy base at Yokosuka, then raised in Florida and Australia, and he came back as a Rotary exchange student because Japan had always been the place in his parents' stories. After college he wanted to live in that mountain town again, and the job that got him there was at TAKAMAZ, a lathe builder down the road. He expected to be selling machines in a few months. They put him on the assembly line for a year, then on the test cut team, where two weeks of sixteen-hour days to hit a customer's deadline was the job.Sam and Jim talk about what culture looks like when there are no rules and nobody is watching, how Japan, the US and Australia each treat people on the floor, what each could take from the other, landing at Shibaura Machine where the machines move in nanometers, and the morning a friend's double booking put Sam in front of forty journalists translating for Floyd Mayweather.KEY TAKEAWAYS- Culture is what people do when there are no rules. Sam's definition: watch what happens when something has no precedent and nobody is supervising. A company that shuts people down gets bureaucracy; one that encourages people gets an attempt.- Learn the machine before you sell it. A year building lathes and four years running test cuts gave Sam answers catalogue salespeople don't have, and that credibility got him in the door with machinists twice his age.- Sixteen-hour days taught him eight years of skills in four. He wouldn't recommend it now, and the rules are stricter than they were, but he wouldn't trade it.- The US has the widest range of shops anywhere, from immaculate to chaos. Sam thinks that range is also why America is the best place to try a new idea.- Japan's gift is accountability; America's is going around the leaf. Sam wants US shops to take on Japanese pride in ownership, from the floor to the top, and Japanese companies to get more comfortable with situations nobody has seen before.CHAPTERS00:00 Arts degree, sumo ring, picometers03:47 If Sam's life were a movie07:11 What culture means to Sam09:06 Born on a Navy base, raised on three continents15:26 Growing up across three cultures20:44 How manufacturing found him24:19 A year on the assembly line, then 16-hour shifts28:27 The Karate Kid of machine tool sales29:35 Moving to the US, then robotics in Tokyo37:47 Landing at Shibaura42:14 How Japan, the US and Australia treat people on the floor47:59 Feeling in over your head49:50 What US and Japanese shops could learn from each other53:50 What makes Sam proud54:44 Translating for Floyd Mayweather58:45 WrapFIND SAMLinkedIn: Sam ThomasonShibaura Machine: https://shibaura-machine.com/Watch Sam's IMTS booth tour of the UVM-450: https://youtu.be/UbgpcYL3vhU
Keven Wang landed in Michigan because someone threw a dart at a map. He was sixteen, a Chinese exchange student, assigned more or less at random to a family in Ann Arbor, and he liked it so much he never really left. His mother, a mechanical engineer who designed air conditioners, had spent his childhood pointing at lamps and furniture and asking how do you think that’s made, and that question became a life. Today he is co-founder and CEO of UnitX, a Silicon Valley company whose AI vision systems find defects on factory lines that no human eye could catch, inspecting billions of dollars of product a year across more than 130 factories he has personally walked.But Jim did not bring Keven on to talk about the software. He brought him on to talk about the buildings and the people, and the conversation goes somewhere most manufacturing interviews never do. It opens on Keven’s movie answer, a dystopian sci-fi where machines have squeezed humans into endless rows of monotonous labor, and his wish to be the crazy engineer who bends that future back toward people. From there he and Jim get into the real stakes of building AI that stays human-centric, why a superintelligence has to be raised more than programmed, the way you align a stronger AI with a weaker one, and why Keven, like so many of Jim’s guests from outside the US, thinks in terms of values rather than culture.The moment that lands hardest is about eyes. Visual inspection, Keven explains, is one of the highest-turnover jobs in a factory, sometimes six months, because the bright light reflecting into a person’s eyes ten hours a day does permanent damage. Some inspectors, early in their working lives, come away barely able to read a book. That is the job his machines take over, and hearing him describe it, you understand that for Keven this was never about replacing people. It was about the mother on the line, the hard-working person turning raw material into something real, and a conviction that the machines should serve the humans, not the other way around.Key TakeawaysMachines should serve people, not the reverse. Keven’s whole worldview, and his company’s, is that AI and robots should be built to make human lives better, with humans staying the captain of their own destiny.Think in values, not culture. Like many of Jim’s guests from outside the US, Keven finds culture exclusionary, tied to a place you’re from. Shared values let anyone, from anywhere, work toward the same mission.The job quietly injured people. Visual inspection is one of the highest-turnover roles in a factory, because the glare does permanent eye damage. The machines take over a job that was hurting the people doing it.Don’t kick out bad parts, stop making them. The goal isn’t catching defects at the end. It’s closing the loop so the upstream process improves and fewer bad parts get made at all.Travel far, not just fast. Keven leads by hiring people far better than him at the things he’s weak at, because one person travels fast, but a group travels far.Chapters00:00 Welcome and who Keven is03:13 Icebreaker: a dystopian sci-fi, and the crazy engineer07:42 Keeping AI human-centric, and the alignment problem15:58 Why he thinks in values, not culture18:34 How immigrants see culture differently20:15 A dart on a map, and landing in Michigan24:29 His mother, the lamp, and his father’s radio28:18 The UnitX idea at Stanford29:52 The bearing factory he can’t forget31:30 Meeting Max, and free t-shirts33:19 Disagreeing well with your co-founder36:12 What happens to the human inspectors39:15 Feeling in over your head42:05 Are you hiring?43:19 What makes him proud46:00 Keven turns the question on Jim51:41 Why local manufacturing mattersFind KevenLinkedIn: Keven WangUnitXUnitX is hiring across sales, business development, product, and engineering. Reach out to Jim for an introduction.
Jim opened this one by getting the guest’s entire bio wrong. He had researched a different Alex Troesch, announced that this one started at Google, and got politely corrected in the first thirty seconds: it was Target, not Google. He left every second of it in, warts and all, which is a pretty good preview of the whole conversation.Alex Troesch is VP of Product at Fulcrum, and the second person from that company Jim has had on the show, because he was impressed enough after talking to co-founder Sonny Han that he wanted to hear from someone else inside it. Alex came up in a small southern Indiana town, started not in manufacturing but at Target corporate, working apparel supply chains and scaling small-format stores, and caught the startup bug helping roll those stores out by literally painting walls. A decade ago, a conversation with Sonny pulled Alex into what was then a scrappy software consultancy called Atlas Solutions. Alex never left.Alex and Jim get into why culture is a deliberate choice rather than a good-or-bad verdict, why so much software built for this industry fails because its makers were never close enough to a shop floor, and why roughly two-thirds of digital transformations collapse on change management rather than technology. Then it gets to the part that should make every shop owner sit up: AI has flipped the economics of building software so completely that Fulcrum stood on stage at its own user conference and called its current product legacy. Alex explains what that means, why everyone at the company from support to account managers can now write code, and what it was like to stand on a shop floor watching a machinist feel for a microscopic burr with a fingertip, and realize the software should get out of that person’s way.Key TakeawaysCulture is a choice, not a grade. Alex argues culture is a deliberate set of values specific to an organization, not universally good or bad, and if you don’t set it intentionally, someone sets it for you.You can’t build for a floor you’ve never stood on. Most manufacturing software fails because its makers underestimate the complexity and stay too far from the customer. Fulcrum’s teams run parts alongside machinists to get it right.Transformations fail on people, not data. Roughly two-thirds of digital transformations fail, and the hard part is never the data structure. It is changing how people work, which is why implementation speed matters most.AI flipped the economics of software. When development was expensive, you generalized. Now that it is cheap, the bottleneck is deciding what to build, and niche customization that never made sense is suddenly easy.Legacy is a moving target. Fulcrum called its own product legacy on stage, because any company starting today is AI-native, and standing still is how you become the old thing.Chapters00:00 Welcome and the wrong bio02:18 The correction: not Google, Target03:27 Icebreaker: a heist movie06:43 Culture is a choice10:19 From small-town Indiana to Target corporate11:00 Scaling stores and catching the startup bug12:38 Joining Sonny at what was then Atlas Solutions13:40 Why software gets manufacturing wrong15:23 When the machines outran the software17:57 Why most digital transformations fail21:40 A generalist’s decade inside Fulcrum24:09 The culture at Fulcrum28:13 On the floor: feeling a micro-burr by hand31:04 How AI flipped the economics of software34:16 Calling their own product legacy on stage36:15 What makes Alex proud39:19 Where to find Alex and FulcrumFind AlexLinkedIn: Alex TroeschFulcrum
Roger Bassous has spent about a decade doing something most people would find deeply uncomfortable: walking into other people’s buildings and asking permission to watch. His software measures machines, which means it also, inevitably, measures the people running them, and Roger has watched more shops react to being watched than almost anyone alive.He did not start in manufacturing. He and his brother Richard were software guys at CompuWare in Detroit when Android launched, and they built a phone backup app that spent years in the top five of the Play Store. When that market crowded out around 2013, Roger opened a bar and started hanging around the mold shop where his middle brother Ed had spent sixteen years. One day Ed showed him the machine monitoring software the shop was stuck with, and it was so bad, so wrong, so slow, that a light went on. The whole city was buying this. The three brothers, two coders and a toolmaker, decided they could do it better. They went to a big Windsor mold builder, asked if they would buy it before a line of code existed, got a yes, and built RER.Roger learned once the software was running: machine monitoring is a people problem long before it is a technology problem. Roger and Jim get into the fear of Big Brother, the brother who made it personal, a story about eyebolts that shows how data changes a conversation, why your best machinist might be the one who looks like he is slacking, and why the owner who buys the bright shiny object without asking the floor ends up with a hundred-thousand-dollar paperweight under a dust tarp.Key TakeawaysMonitoring is a people problem first. The hard part was never the software. It was earning the trust of people who fear being watched, which is why the brother with sixteen years on the floor was the key to the whole company.The utilization gap is hidden capacity. Shops that believe they run at eighty or ninety percent often run at thirty. That gap is not a failure, it is room to take on more work, and it is how reshoring actually happens.Data changes the conversation. A machinist complaining about missing eyebolts gets ignored. A machinist who logs the hours lost looking for them gets every bay restocked in a week. Numbers make the floor’s problems undeniable.The report card cuts both ways. Monitoring lets the real top performers prove it, and it lets owners see that the guy who looks like he’s slacking may be the one whose machines never stop.Chapters00:00 Welcome and who Roger is03:01 Icebreaker: a sci-fi movie05:34 What culture means to Roger09:27 Before RER: CompuWare and a top-five app12:19 From a backup app to a bar to a mold shop13:19 The bad software that became the opportunity14:40 What Ed brought from 16 years on the floor15:20 Idle reasons, and the pop-up that changed everything17:45 What the early product got wrong, and finding the small shops21:47 AI, hype, and garbage in garbage out27:27 A people problem before a technology problem28:38 You think you’re running at 90 percent29:14 Capacity, reshoring, and the hidden headroom32:31 The eyebolts story: how data changes the conversation36:19 Walking over dollars to pick up pennies37:32 The report card: career paths and pay for performance41:44 The machinist everyone misjudged43:10 What’s next for machine monitoring45:36 What makes Roger proud47:13 Why shops resist, and the $150K paperweight53:02 CloseFind RogerLinkedIn: Roger BassousRER Software




