The Deckheads Podcast

Most people still believe composite decking gets too hot, is slippery when wet, and costs way more than it’s worth. Some of that used to be true — but the industry has changed. In this episode of the Deckheads Podcast, we break down how composite decking has evolved in the Canadian market — from capped vs uncapped boards to PVC, mineral-based composites, pricing ranges, traction, expansion, and installation rules that matter in our climate. This is contractor-level, unsponsored insight — built for Canadian homeowners and builders planning a backyard project. 

Most deck problems don’t start with the build — they start with the plan. In this episode, we break down the biggest mistakes homeowners (and sometimes contractors) make when building a deck. From layout and stair placement to structural spans, permits, fasteners, and budgeting — this is the stuff that actually costs you money if you get it wrong. If you're building this season, watch this before you buy materials. 00:00 – Funny Deck Fails (Staples & Plywood Ideas) 08:03 – Design Mistakes: Size, Stairs & Wasted Space 13:34 – Structural Mistakes: Spans, Cantilevers & Code 19:50 – Material Selection: Don’t Cheap Out 27:57 – Fasteners: What NOT to Use 30:50 – Railing Rules & Safety Changes 36:18 – Water Management & Drainage 40:16 – Staining: When Should You Actually Do It? 43:24 – Budget Contingencies (Plan for Surprises) 48:16 – Final Advice: Do Research & Be Open to Feedback Building a deck isn’t just picking a board you like. It’s layout planning, understanding traffic flow, managing water, following span charts, choosing the right fasteners, and budgeting smart. Build it once. Build it right.

People planning a deck all ask the same questions: Is composite decking slippery? Does it get too hot? Why does it cost so much? Is it actually worth it? In this episode of the Deckheads Podcast, deck store owners break down what’s changed in decking over the last 10 years — and which problems are real vs outdated advice. We explain how modern decking materials improved traction, reduced heat, and why pricing ranges so wildly between products. If you're budgeting a backyard project, this will save you from expensive mistakes before you build. 00:00 Why People Still Believe Old Decking Advice 07:04 What Actually Changed in Decking Over 10 Years 11:56 Why Some Composite Decking Is Slippery 21:04 Does Composite Decking Get Too Hot? 23:20 Why Decking Prices Range So Much 24:20 The Budget Question Homeowners Hate 25:35 Real Example: A $50,000 vs $25,000 Deck 26:56 Why We Give Honest Opinions (No Sponsorship) This is honest contractor discussion — not a tutorial and not sponsored.

Building with composite decking in freezing temperatures? Before you tighten that clip or make that cut, tune in. In this episode of The Ultimate Deck Podcast, Shane and the crew break down how cold weather affects composite boards — from expansion and contraction to proper gapping, fastening, and cutting techniques. Learn insider tricks for clean edges, durable installs, and stress-free winter builds. Perfect for contractors and DIYers looking to stay productive (and accurate) through the cold season.

It’s spooky season, and nothing’s scarier than a DIY deck gone wrong. 👻 In this Halloween special, the Ultimate Deck crew counts down the top five decking horrors — from phantom footings and cursed ledgers to fastener fails and permit nightmares. Learn the scariest mistakes homeowners make (and how to avoid them) in this entertaining yet educational episode that’ll have you laughing, cringing, and double-checking your joist spacing.

Rotten or damaged deck boards can ruin your deck and pose safety risks. Learn how to identify, repair, and replace boards the right way.

Not sure if your deck project requires a permit? We explain when permits are needed, who handles them, and why skipping one can be costly.

Composite decking is low-maintenance, but not no-maintenance. Learn the simple steps that keep your deck looking like new — no sealing required.

Unsure whether to stain or seal your deck before winter? We break down the advantages of fall application versus waiting until spring.

Winter can be tough on decks. Discover the simple steps you should take in the fall to protect your deck from snow, ice, and moisture damage.

Thinking about a new deck or patio? Learn why building in the fall can save you thousands, avoid supply shortages, and set you up for stress-free summer enjoyment. Most people wait until spring… and that’s a mistake.

Deck lighting does more than just look good — it keeps your family safe, extends your outdoor living into the night, and creates the perfect ambience for entertaining. In this episode of The Ultimate Deck Podcast, we break down why lighting should always be part of your deck budget, the pros and cons of solar vs low-voltage systems, and how the right fixtures can add both function and wow factor to your backyard. Whether you’re building new or upgrading an existing space, this episode will help you see your deck in a whole new light.

Thinking about upgrading your deck or outdoor space with cable railing? In this episode of The Ultimate Deck Podcast, we dive into everything you need to know about this modern railing option. From its sleek, unobstructed views to the key benefits homeowners love, we also cover the drawbacks, cost considerations, and the building codes that dictate where cable railing can (and can’t) be installed. Whether you’re a DIYer planning your own project or a contractor helping clients choose the right system, this episode will give you the insider knowledge to make the right call.

Should you hide your fasteners or keep it simple with screws? We compare performance, cost, and maintenance headaches.

Deck stairs are one of the biggest inspection fails. We break down how to design and build stairs that look good and pass code on the first try.

Can you safely have a fire pit or grill on your deck? We explore safety rules, product solutions, and why some setups void warranties.

A hot tub on a deck is the dream — and a structural nightmare if you don’t plan right. We explain what you need to know before setting 5,000 lbs on your backyard deck.

Shopping for composite decking can feel overwhelming with so many brands claiming to be “the best.” In this episode, we give you a clear overview of the top 10 composite decking brands — from Trex and TimberTech to Deckorators, Fiberon, MoistureShield, and more. We’ll highlight the strengths, weaknesses, and standout features of each so you can make an informed decision for your next deck project.

Everyone wants a beautiful deck that doesn’t break the bank. In this episode we reveal seven proven ways to cut costs on your deck build — without sacrificing safety, quality, or looks.

Is there a perfect time of year to build a deck? We explore the pros and cons of spring, summer, and fall builds—covering everything from material availability and moisture content to scheduling and soil conditions. Whether you're a DIYer or a contractor, get the seasonal strategy that sets your project up for success.