DiscoverRaw Material
Raw Material
Claim Ownership

Raw Material

Author: Jamie Marzilli

Subscribed: 1Played: 7
Share

Description

Raw Material is about the people behind the parts. The owners, machinists, operators, builders, and problem-solvers who carry the weight, make the calls, fix the messes, and keep the work moving. This podcast gets into the pressure, the failures, the lessons, and the wins that come with life in manufacturing. No fluff. Just real conversations about pushing people, not buttons.
15 Episodes
Reverse
Everybody wants to hit $3 million. Almost nobody talks about the stretch between $2 million and $3 million, where the business turns on you.I sat down with Adam Zimmer of Zimmer Manufacturing, a guy standing exactly where I stood a couple of years ago. Same machines, same plateau, same itch to hire your way out of it. I'll tell you now, that doesn't work. We went from 22 to 29 people and the top line didn't move.In this conversation, we get into role duplication, the ask to seat ratio, and why overhead eats you alive when you only own nine machines. Then I put Adam on the hot seat with the question he brought: keep hiring and push through, or pull back and regroup.My answer is a salesperson first, more QC than you think you need, 80 percent of your work on one zero point system, and automation on everything you already own. And the part nobody wants to hear: it never gets easier, you just get tougher.What's Covered in this Episode(0:00) I hired from 22 to 29 people and the top line didn't move(1:08) Learn more about Adam Zimmer and Zimmer Manufacturing(3:19) Adam's AS9100, ITAR, and why we're both moving away from firearms work(5:20) Keep your spindles running with the Hennig Workflow Automation System(6:11) A snapshot of Zimmer Manufacturing in 2026(7:02) Why the $2 to $3 million plateau is a role duplication problem(10:55) Go bigger or go smaller: business is a competition of staying in business(13:14) Burned by recruiters? That's why we built Hire MFG Leaders(15:33) The E-Myth: a great machinist isn't automatically a great owner(17:05) Buying and navigating the difficulties of running a machine shop(23:11) Kennametal on tooling that never slows your shop down(23:59) Adam's question for me: keep hiring or retreat and regroup(27:21) Set your core values before you go on a hiring spree(30:31) Why "you can't scale a prototype shop" might be a mental block(33:16) Why the first person I'd hire is a salesperson(34:05) Automate what you own, and the 10 percent overtime rule before you hire(37:22) Why I don't trust manufacturer's reps to work for you(39:09) Put AI chat on your website with Navu(40:20) Bringing in a fractional salesperson or part-time hire(45:08) Fix sales and your bottleneck becomes quality control(47:16) Where shops get stuck by headcount and why 50 employees scares people(50:21) It never gets easier, you just get tougherResources MentionedNavuHennig Workflow Automation SystemHire MFG LeadersKennametalIMTSMakingChipsConnect with Adam Zimmer at Zimmer ManufacturingConnect with Adam on [email protected] ManufacturingConnect with Jamie on [email protected]
Everybody wants to talk about AI in manufacturing. Almost nobody wants to talk about where your data goes once you hand it over. At IMTS, Lee and I sat down with Ephy Torenberg and Josh Olmstead from HighQA to talk about both.Here's where I land. AI is real and it's here to stay, but you can AI your way into a black hole. I've lost three weeks to vibe coding, one bug away from done the whole time, and Lee has the receipts. Clean data and people who understand the system come first.We get into why an inspection is a data set and not a report, why design, manufacturing engineering, and quality end up speaking three different languages, and why keeping the original design intent intact from print to PPAP matters more than any shiny tool.Then the part that should keep you up at night: CUI headed to the cloud, the primes pushing data-embedded models, and a scanner that can't measure the parts that go into scanners. HighQA's answer is local, optional AI and a PolyWorks workflow that Josh says is delivering 3 to 5 times faster metrology programming.If you run a shop, your job is to remove the uncertainty from the process. This episode is about how.What's Covered in this Episode(2:06) Ephy’s background and why he’s customer-focused at HighQA(5:08) Josh on HighQA Academy and how it gets my new techs on the same page fast(6:22) Manufacturing buyers don’t ask simple questions—Navu can help(7:41) Ephy on why AI makes garbage without clean, contextualized data(9:42) The vibe coding trap: you’re always “one bug away”(11:00) The real problem is keeping the original design thread alive(12:30) The HighQA approach: a system of quality management(14:13) Three departments, three languages, and the plan that gets them talking(16:35) My best people write the plan and the whole floor follows it dimension by dimension(18:26) Keep your spindles running with the Hennig Workflow Automation System(19:17) How HighQA built OCR for GD&T locally, with a human validating every plan(21:41) Why customers don't get direct database access and what the offline data lake does instead(23:27) Fully local, AI as an option, and a path forward for CMMC shops(26:04) Why software platforms are moving to my customers, and the next divide after five-axis and AS9100(27:28) HighQA360: Ending back-and-forth between buyers and suppliers(29:44) Data-embedded models, the primes killing the print, and why "just use your scanner" doesn't work(32:52) The PolyWorks and HighQA workflow behind 3 to 5 times faster metrology programmingResources MentionedNavuHennig Workflow Automation SystemHighQAPolyWorksIMTSMakingChipsConnect with Ephy Torenberg and Josh OlmsteadHighQAEphy ToringbergJosh OlmsteadConnect with Raw MaterialConnect on LinkedIn [email protected] MakingChips
AI is coming for manufacturing, but I'm not interested in another piece of software that promises to replace machinists with the push of a button. I want technology that actually understands what happens on the shop floor and helps good people get more done.That's why I was excited to sit down with David Priev from Limitless Labs during IMTS 2026. His team is building an AI-powered CAM programming assistant that works alongside machinists, helping them program parts faster, troubleshoot problems, and cut through the tedious work that slows down production.We get into how Limitless Labs is teaching AI to understand the physics of machining, why the next generation of manufacturing software needs domain experts, and what happens when you connect programming, machine data, and inspection results. We also tackle the questions every shop owner should be asking about AI, including ITAR compliance, data privacy, and whether your programs are being used to train someone else's model.For me, the opportunity isn't replacing our most experienced people. It's giving them better tools, bringing new talent up to speed faster, and improving the one thing that ultimately drives profitability: throughput.What’s Covered in this Episode(0:00) Why AI could change the future of software engineering and manufacturing(0:52) Dave's engineering background and introduction to CNC machining(5:52) Addressing the CNC programming bottleneck with AI(6:25) Work ahead of your machines with the Hennig WorkFlow Automation system(7:17) The Limitless Labs founding team and rapid company growth(10:41) Why Limitless Labs shifted its focus from quoting to CAM programming(13:56) Using AI to accelerate employee training and improve throughput(15:16) Kennametal tooling helps manufacturer cut faster and run longer (16:04) The vision for an AI machinist that connects programming, inspection, and machine data(18:01) Simplifying CMM reports and reducing manufacturing iterations(19:52) Jamie's firsthand experience with the Limitless Labs software(21:10) Raising venture capital and educating investors about CNC manufacturing(23:18) Why domain expertise is becoming increasingly valuable in the AI era(24:17) Building reliable industrial AI software and teaching AI to understand CAD models(26:28) Capturing the tribal knowledge of experienced machinists(28:32) ITAR, CMMC, data privacy, and protecting proprietary CAM programs(31:08) Why improving throughput is essential to competing and winning businessResources MentionedMastercamSiemensProShop ERPMachine Shop Mastery PodcastIMTSHennig Workflow Automation SystemKennametalMakingChipsHow to Connect with David PrievConnect with David Priev on LinkedInLimitless Labs
I used to think core values were nonsense. White collar guys in stuffed shirts telling each other how great their culture is, and then you pull up their Glassdoor page and the place is a hellhole. So I skipped that part for fifteen years. I was dead wrong, and I'm fine saying it. That's where the growth is.We hung a QR code on the conference room wall and asked every single person here, not just the leadership team, to name three values they admire in a coworker. The words that came back got dumped into ChatGPT and came out as GRIT 3D. Growth, respect, integrity, teamwork, and then dedication, dependability, and detail in place of dark, dirty, and dangerous. Grit is the whole company. It felt like it was meant to be.Then it got uncomfortable. Cutting 28% of the company. Finding out that when somebody lives your values and still can't produce, that one is on me and not on them. Fifteen years in, I finally feel like a president at this company instead of an employee, and I owe it to a book.What's Covered in this Episode(0:42) The second half of my review of Paul Van Metre's Precision Manufacturing, Precision Business(2:01) Why I wrote off core values as corporate nonsense for years (and why I was dead wrong)(4:27) Running through a word cloud exercise with our entire team and what it showed us(6:25) What GRIT 3D stands for, and redefining dark, dirty, dangerous(7:20) Why we downsized 28% at the start of the year (and how things improved)(8:27) Hiring for skill instead of character, and why it always ends the same way(10:07) Why we love SMW Autoblok workholding (10:48) A few examples of the ‘Peter Principle’ in play at Marzilli Machine(13:18) Swapping our shipping manager and our office manager—and both throughputs took off(14:11) The easiest way to make the Traction framework work for your shop(16:47) The personal win and business win I wanted to cut and why I never will (18:56) Why we created Hire MFG Leaders and why you should use it(19:26) Rating the meetings one to ten (and what the meetings brought to light)(21:46) What’s working at Marzilli Machine and what needs improvement(26:00) What’s next for Marzilli Machine? Resources MentionedPrecision Manufacturing, Precision Business by Paul Van MetreThe Goal by Eliyahu GoldrattTraction and the EOS systemSMW AutoblokHire MFG LeadersProShop ERPIMTSConnect with Jamie MarzilliConnect on [email protected]
Paul Van Metre's book isn't a general business book with a machining chapter bolted onto it. It's built for this industry, and one sentence in it has been digging in my ribs for three weeks: "If precision matters on the shop floor, it has to matter in the business too."Reading it back made me realize something that I didn't want to admit. What got me here isn't going to take me there.This one isn't comfortable. It's me admitting I'm not as good at this as I thought I was, and then doing something about it. Stick around for part 2.What's Covered in this Episode(0:45) Why I'm doing my first book review, and how Paul Van Metre's manuscript blew my mind(3:58) Five or six evolutions since my wife dared me to start this company at 31(4:29) The harsh review I gave Paul, and wondering later if I was the hard reader(5:11) The six levels of machine shop managers, and why that early pain never leaves you(5:56) The one sentence in the book that's been digging in my ribs for three weeks(6:59) Investing ProShop ERP is an investment in your business(8:38) The myth of heroics, and why being a great machinist doesn't make you a good owner(11:30) Which shop am I? Admitting out loud that I'm not holding those margins(13:13) Why you're better off doing nothing than doing something for a loss(15:00) Why we created Hire MFG Leaders (and why you should use it)(15:29) The Goal, the theory of constraints, and why your biggest bottleneck defines your throughput(16:38) Six new spindles, a 13,000 square foot building, and the same output as before(19:41) Quality control should be staffed like an emergency room, and the hire that erased that bottleneck(20:42) The bottleneck moved to the front of the shop—and it turned out to be me(21:41) Why we’ve begun implementing the EOS system at Marzilli machineResources Mentioned“Precision Manufacturing, Precision Business” by Paul Van MetreProShop ERPHire MFG LeadersThe Machine Shop Mastery PodcastThe Goal by Eliyahu GoldrattTraction and the EOS systemConnect with Jamie MarzilliConnect on LinkedInRaw Material on SpotifyRaw Material on AppleMakingChips
loading
Comments