Today, our guest is Marcus Herrera. Marcus is a Sales Application Engineer at HYDAC Technology Corporation – a provider of fluid power solutions to OEMs, manufacturers, and end users of a variety of heavy duty mobile and industrial equipment. Marcus is also a certified hydraulics and a certified electronic controls specialist. He recently presented at NFPA’s Hydraulics Conference co-located at the 2024 iVT EXPO. His presentation was on demystifying functional safety in mobile hydraulics, and we invited him into our forum to learn more about that topic. Connect with Marcus: marcus.herrera@hydracusa.com Visit the HYDAC website: https://www.hydac.com/en-us/ Connect with the host, Eric Lanke, at elanke@nfpa.com or on LinkedIn at the National Fluid Power Assocation.
Greg is a Business Development Manager at Marzocchi Pumps, a company that designs, manufacters, and sells external gear pumps and motors for high performance applications. We spoke with Marzocchi's president in a previous episode about their low-noise gear pumps for automotive applications. Today, we invited Greg into our forum to learn about the updates and new applications of this technology. Connect with Greg: GregS@MarzocchiPumpsUSA.com Visit the Marzocchi website: https://www.marzocchipompe.com/ Connect with the host, Eric Lanke, at elanke@nfpa.com or on LinkedIn at the National Fluid Power Association.
Last week, we brought you the first half of our special coverage from the 2024 iVT Expo, where we heard from industry leaders and innovators on the show floor. Now, we’re back with more insights and testimonials from the final day of the event! Tune in to hear what our guests had to say as they wrapped up their experience at this year's expo. iVT EXPO is an annual exposition for the off high vehicle design and engineering community, with exhibits that are highly focused on a number of key technologies, including new powertrains, electric and hybrid systems, control systems, sensors, and autonomous technologies. Hydraulics serve as a key enabling technology for these vehicles and many of these systems, iVT EXPO offers an ideal platform for growth and expansion of hydraulics, both in its affiliated education program and on its show floor. Thank you to the following companies for having guests speak on this episode of Fluid Power Forum: HUSCO, Applied Engineering Services, Marzocchi Pumps, QCC, Magnet Shultz of America, and J.R. Merritt.
We’re breaking our usual schedule with a special episode of the Fluid Power Forum, recorded live at the 2024 iVT Expo! Tune in as we chat with exhibitors and attendees to discover why they’re here and what’s catching their eye at this year’s show. With one more day left, there's still time to explore the latest innovations and connect with industry leaders—don’t miss out! iVT EXPO is an annual exposition for the off high vehicle design and engineering community, with exhibits that are highly focused on a number of key technologies, including new powertrains, electric and hybrid systems, control systems, sensors, and autonomous technologies. Hydraulics serve as a key enabling technology for these vehicles and many of these systems, iVT EXPO offers an ideal platform for growth and expansion of hydraulics, both in its affiliated education program and on its show floor. Thank you to the following companies for having guests speak on this episode of Fluid Power Forum: Engineering Technology Services, Brennan Industries, Sure Grip Controls, AKG Americas, HED, Bailey Hydraulics, VIS Hydraulics, HAWE Hydraulics, Wandflu
Today’s episode is part of a special series were doing to focus on the cutting-edge fluid power technologies and customer solutions on display at the 2024 iVT EXPO. iVT EXPO is an annual exposition for the off high vehicle design and engineering community, with exhibits that are highly focused on a number of key technologies, including new powertrains, electric and hybrid systems, control systems, sensors, and autonomous technologies. Hydraulics serve as a key enabling technology for these vehicles and many of these systems, iVT EXPO offers an ideal platform for growth and expansion of hydraulics, both in its affiliated education program and on its show floor. Today’s guest is Russell Evans. Russell is the Advanced Systems Team Manager at HYDAC. HYDAC is a manufacturer of hydraulic, filtration and electronic components and systems. Today, we invited Russell into our forum to learn about the applications that HYDAC will be showcasing at their exhibit at iVT EXPO. Connect with the host, Eric Lanke at elanke@nfpa.com or on LinkedIn at the National Fluid Power Association. Connect with Russell: russell.evans@hydacusa.com
Today’s episode is part of a special series were doing to focus on the cutting-edge fluid power technologies and customer solutions on display at the 2024 iVT EXPO. iVT EXPO is an annual exposition for the off high vehicle design and engineering community, with exhibits that are highly focused on a number of key technologies, including new powertrains, electric and hybrid systems, control systems, sensors, and autonomous technologies. Hydraulics serve as a key enabling technology for these vehicles and many of these systems, iVT EXPO offers an ideal platform for growth and expansion of hydraulics, both in its affiliated education program and on its show floor. Today, our guests are DJ O’Konek and Andy Tobolewski. DJ is an Engineering Manager at Nott Company, a supplier of fluid power products and systems, industrial products and custom rubber fabrication including software and controls options to enhance performance and control of fluid power systems. Andy Tobolewski is the President of MRS Electronics, a Manufacture of smart electronic control products as well as customized hardware and software solutions for the automotive industry for over 25 years. Nott Company is sharing a booth with them at iVT this year. We’ve invited these guests into our forum to learn about the applications that MRS Electronics and Nott Company will be showcasing at their exhibit in late August. Connect with the host, Eric Lanke at elanke@nfpa.com or on LinkedIn at the National Fluid Power Association. Connect with our DJ: dokonek@nottco.com Connect with Andy: andy.tobolewski@mrs-electronics.com
Today’s episode is part of a special series were doing to focus on the cutting-edge fluid power technologies and customer solutions on display at the 2024 iVT EXPO. iVT EXPO is an annual exposition for the off high vehicle design and engineering community, with exhibits that are highly focused on a number of key technologies, including new powertrains, electric and hybrid systems, control systems, sensors, and autonomous technologies. Hydraulics serve as a key enabling technology for these vehicles and many of these systems, iVT EXPO offers an ideal platform for growth and expansion of hydraulics, both in its affiliated education program and on its show floor. On today’s show, our guest is Russ Schneidewind. Russ is the Director of Business Development at HydraForce. HydraForce designs, manufactures, and markets hydraulic cartridge valves, custom manifolds, and electro-hydraulic controls for use in industrial and mobile equipment applications worldwide. Connect with the host, Eric Lanke at elanke@nfpa.com or on LinkedIn at the National Fluid Power Association.
Today’s episode is part of a special series were doing to focus on the cutting-edge fluid power technologies and customer solutions on display at the 2024 iVT EXPO. iVT EXPO is an annual exposition for the off high vehicle design and engineering community, with exhibits that are highly focused on a number of key technologies, including new powertrains, electric and hybrid systems, control systems, sensors, and autonomous technologies. Hydraulics serve as a key enabling technology for these vehicles and many of these systems, iVT EXPO offers an ideal platform for growth and expansion of hydraulics, both in its affiliated education program and on its show floor. Today’s guest is Rein Herrman. Rein is Business Development Manager at IFP Motion Solutions Inc. IFP Motion Solutions Inc. is a distributor of hydraulic power units and automation systems. Connect with Rein: rherrman@ifpusa.com Connect with the host, Eric Lanke at elanke@nfpa.com or on LinkedIn at the National Fluid Power Association.
Today’s episode is part of a special series were doing to focus on the cutting-edge fluid power technologies and customer solutions on display at the 2024 iVT EXPO. iVT EXPO is an annual exposition for the off high vehicle design and engineering community, with exhibits that are highly focused on a number of key technologies, including new powertrains, electric and hybrid systems, control systems, sensors, and autonomous technologies. Hydraulics serve as a key enabling technology for these vehicles and many of these systems, iVT EXPO offers an ideal platform for growth and expansion of hydraulics, both in its affiliated education program and on its show floor. Today’s guest is Ben Hunger. Ben is the President at IC-Fluid Power, Inc. IC-Fluid Power Inc. is a distributor and industrial representative for hydraulic components from the European market. Today, we invited Ben into our forum to learn about the applications that IC-Fluid Power will be showcasing at their exhibit at iVT EXPO. Connect with Ben: ben@ICFluid.com Connect with the host, Eric Lanke at elanke@nfpa.com or on LinkedIn at the National Fluid Power Association.
Today’s episode is part of a special series were doing to focus on the cutting-edge fluid power technologies and customer solutions on display at the 2024 iVT EXPO. iVT EXPO is an annual exposition for the off high vehicle design and engineering community, with exhibits that are highly focused on a number of key technologies, including new powertrains, electric and hybrid systems, control systems, sensors, and autonomous technologies. Hydraulics serve as a key enabling technology for these vehicles and many of these systems, iVT EXPO offers an ideal platform for growth and expansion of hydraulics, both in its affiliated education program and on its show floor. Today, our guests are Bob Pettit, Director of Knowledge Development and Chase Younker, Electronics Product Manager, both at HAWE Hydraulik. HAWE is a manufacturer of hydraulic power units, pumps, valves and cylinders. We’ve invited these guests into our forum to learn about the applications that HAWE will be showcasing at their exhibit at iVT EXPO. Connect with Bob: b.pettit@hawe.com Connect with Chase: c.younker@hawe.com Connect with the host, Eric Lanke, at elanke@nfpa.com or on LinkedIn at the National Fluid Power Assocation.
Today’s guest is Mike McVay. Mike is the Group President of Mobile Systems Integration at Cross Company. Cross Company has two groups involved in fluid power. The Hydraulics Group applies and sells hydraulic components, custom power units, custom manifolds and electronic control systems to an OEM customer base. Today, we invited Mike into our forum to learn about the applications that Cross Company will be showcasing at their exhibit at iVT EXPO.
On today’s show, our guests are James Simpson and John Mclaughlin. James is the Global Segment Director Energy, and John is the Director of R&D Services Americas, both at Trelleborg Sealing Solutions. Trelleborg is one of the world’s leading developers, manufacturers and suppliers of precision seals, bearings and custom-molded polymer components. Trelleborg is actively addressing the challenges of sealing hydrogen applications, offering advanced materials and testing facilities to ensure reliability and safety in high-pressure and extreme temperature environments. Today, we invited John and James into our forum to learn how hydrogen may impact the hydraulics of the future. Connect with James: James.Simpson@trelleborg.com Connect with John: John.Mclaughlin@trelleborg.com Connect with the host, Eric Lanke at elanke@nfpa.com or on LinkedIn at the National Fluid Power Association.
On today’s show, we have a special presentation from the latest NFPA Quarterly Technology Conference. Our Quarterly Technology Conferences are done in collaboration with MSOE’s Fluid Power Industrial Consortium. They feature presentations on market-ready fluid power technologies and allow for networking across the fluid power supply chain – as suppliers, manufacturers, and OEMs come together for mutual benefit. Our March 7, 2024 event was focused on Fluid Power technologies that are helping to drive industrial machines towards Predictive and Preventative Maintenance. Two of our presenters were Kris Mikulan and Connor Dudas, both from Schroeder Industries. What follows is a recording of the presentation they gave at this March Quarterly Technology Conference. If you want to follow along with their slides, we’ve put links in the show notes that will allow you to watch the presentation recording here. The presentation was titled “Predictive Maintenance & Condition Monitoring.” Connect with the host, Eric Lanke, at elanke@nfpa.com or on LinkedIn at the National Fluid Power Assocation.
Derek is Vice President of Integrated Circuit Solutions at Danfoss Power Solutions. Danfoss designs engineered hydraulic, electric, and electronic systems and components, for use primarily in off-highway mobile equipment and attachments. Recently, Danfoss expanded its cartridge valve portfolio, promising increased operator comfort and system efficiency, along with enhanced stability and safety. Today, we've invited Derek to our forum to delve into the impact of this portfolio on fluid power technologies. Connect with Derek: dbailey@danfoss.com Connect with the host, Eric Lanke, at elanke@nfpa.com or on LinkedIn at the National Fluid Power Association.
Today’s episode is part of a special series were doing to focus on the cutting-edge fluid power technologies and customer solutions on display at the 2024 iVT EXPO. iVT EXPO is an annual exposition for the off high vehicle design and engineering community, with exhibits that are highly focused on a number of key technologies, including new powertrains, electric and hybrid systems, control systems, sensors, and autonomous technologies. Hydraulics serve as a key enabling technology for these vehicles and many of these systems, iVT EXPO offers an ideal platform for growth and expansion of hydraulics, both in its affiliated education program and on its show floor. Our first guest in this series is Adam Livesay. Adam is the co-founder of a company called Elevāt-- a Seattle-based Industrial IoT company focused on connecting the Industrial World. Elevāt powers the ecosystem of smart manufacturers, machines, and connected fleets to deliver smart services, products, and outcomes to the marketplace. We’ve had Adam on the podcast before to help discuss possible IoT applications for the fluid power industry. Today, we invited him into our forum to learn about the applications that Elevāt will be showcasing at their exhibit at iVT EXPO. Connect with Adam: adam@elevat-iot.com Connect with the host, Eric Lanke, at elanke@nfpa.com or on LinkedIn at the National Fluid Power Association.
On today’s show, our guests are Jose Di Geronimo and Dan Lentsch. Jose is the CEO and Dan is the Head of Engineering, both at Amalga Composites. Amalga Composites is a leader in the design, engineering, and manufacturing of filament–wound, resin transfer & compression molded composite products since 1966. Today, we invited Jose into our forum to learn how Amalga’s anti-corrosion composite tubing improves performance for pneumatic actuators. Connect with Jose on LinkedIn: https://www.linkedin.com/in/josedigeronimo/ Connect with Dan on LinkedIn: https://www.linkedin.com/in/danlentsch/ Connect with the host, Eric Lanke, at elanke@nfpa.com or on LinkedIn at the National Fluid Power Association
Don is the Dean of Engineering and Advanced Technology at Macomb Community College. Macomb Community College is the newest Hub in NFPA’s Fast Track to Fluid Power program, so we invited Don into our forum to learn more about what that means for Macomb and how the school is preparing its students to be part of the future of the fluid power industry. Connect with Don: hutchisond@macomb.edu Connect with the host, Eric Lanke, at elanke@nfpa.com or on LinkedIn at the National Fluid Power Association.
David is Regional Sales Manager at Delta Motion. Delta Motion manufactures electrohydraulic motion controllers and remote fieldbus servo controllers for the automotive, injection/blow molding, steel and aluminum mills and others. Today, we invited him into our forum to learn about a specific application of Delta’s technology; Advanced hydraulic control on an industrial stretch press. Connect with David: mac@deltamotion.com Connect with the host, Eric Lanke, at elanke@nfpa.com or on LinkedIn at the National Fluid Power Association.
Ron is the Business Development Manager of Mobile Hydraulics at Gefran, Inc. We’ve had Ron on the podcast before to discuss Gefran’s multivariable position sensors. Today, we’ve invited him back to the forum to learn about two new developments in Gefran’s extended length position measurement technology, and how they help increase operator safety in a wide variety of applications. Visit Gefran's website at: https://www.gefran.com/ Connect with Ron: ron.akers@gefran.com Connect with the host, Eric Lanke, at elanke@nfpa.com or on LinkedIn at the National Fluid Power Association.
Andrew is the System Integration Manager at HYDAC Technology Corporation, a provider of fluid power solutions to OEMs, manufacturers, and end-users of a variety of heavy-duty mobile and industrial equipment. Today, we invited him into our forum to learn about HYDAC's energy mapping process. Connect with Andrew: andrew.krajnik@hydacusa.com. Connect with the host, Eric Lanke, at elanke@nfpa.com or on LinkedIn at the National Fluid Power Association.