Off the Cut Podcast

We delved into Zach's current project, an educational course on console modification. He plans to make the course engaging but not boring, much like a YouTube video. We also discussed the challenges of creating a course, such as balancing the need for comprehensive information with keeping people's attention. The episode wrapped up with a discussion about the new H2S and H2C 3D printers from Bambu. And we answered a question from a viewer about whether carbon fiber filament can cause splinters.Got a question that you want us to answer? Send us an email at ⁠⁠offthecutpodcast@gmail.com⁠Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠⁠⁠https://streamyard.com/pal/c/5926541443858432⁠  ⁠⁠ ⁠-------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠⁠⁠⁠https://www.patreon.com/offthecutpodcast⁠  ⁠⁠⁠-------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠⁠⁠-------------------------Pick Up Some Merch!Windbreaker - ⁠⁠⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠⁠⁠   -------------------------Follow ZacInstagram - ⁠⁠⁠⁠⁠https://www.instagram.com/zacbuilds⁠ YouTube - ⁠⁠⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠⁠⁠  -------------------------Follow EricInstagram - ⁠⁠⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠⁠⁠ YouTube - ⁠⁠⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠⁠  ⁠-------------------------Follow Deric@PecanTreeDesign everywhere⁠⁠⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠⁠⁠ ---------------------------Shoutout to:KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠⁠kmtools.com/SPENCLEYDESIGNCO⁠ And ⁠WTB Woodworking⁠, our newest sponsor! Check out the giveaway over here:⁠https://www.wtbwoodworking.com/giveaway⁠ #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

We're talking about YouTube's new "Hype" button, the frustrations of IT support, and why trusting a handyman from places like Angie's List and Task Rabbit may be a gamble.Episode HighlightsThe Hype is Real (or is it?): We dive into YouTube's new "Hype" feature, a way to boost smaller creators, and debate whether it's a game-changer or just another button to smash. Find out what a "small creator" is in YouTube's eyes and how many "Hypes" you get a week.DIY Dilemmas: From trying to install a front door with YouTube tutorials to the pros and cons of hiring contractors with TV commercials, we share our home renovation trials and triumphs. Learn why some jobs are "too small" for a contractor and why we'd rather do it ourselves, even if it takes more time.A Lumberyard's Lament: Our tools get a shout-out as we discuss the essentials versus the dust-collectors, including a circular saw's new life as a "destruction saw" for pallets. We also get into the nuances of using a track saw off its track, a topic that apparently gets people fired up on Reddit.Know Your House: We discuss how to know when it's time to replace your roof, and what signs to look for in the attic and from the street. Plus, we talk about the financial sense (or lack thereof) in over-improving a starter home.Got a question that you want us to answer? Send us an email at ⁠⁠offthecutpodcast@gmail.com⁠Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠⁠⁠https://streamyard.com/pal/c/5926541443858432⁠  ⁠⁠ ⁠-------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠⁠⁠⁠https://www.patreon.com/offthecutpodcast⁠  ⁠⁠⁠-------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠⁠⁠-------------------------Pick Up Some Merch!Windbreaker - ⁠⁠⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠⁠⁠   -------------------------Follow ZacInstagram - ⁠⁠⁠⁠⁠https://www.instagram.com/zacbuilds⁠ YouTube - ⁠⁠⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠⁠⁠  -------------------------Follow EricInstagram - ⁠⁠⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠⁠⁠ YouTube - ⁠⁠⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠⁠  ⁠-------------------------Follow Deric@PecanTreeDesign everywhere⁠⁠⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠⁠⁠ ---------------------------Shoutout to:KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠⁠kmtools.com/SPENCLEYDESIGNCO⁠ And ⁠WTB Woodworking⁠, our newest sponsor! Check out the giveaway over here:⁠https://www.wtbwoodworking.com/giveaway⁠ #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

We dive into the wild world of online scams! We're talking about everything from ridiculously professional-looking emails from "Sony" that want you to download files on a Windows PC (yep, a very specific scam that almost got us!) to companies that stiff YouTubers on payments after their ad reads go live. We'll also tell you about our own run-ins with scams and discuss why we're so paranoid about our digital security these days.This week we're ditching the aftershow to chat live with our top-tier patrons over on the BYOC! This episode is a must-listen for anyone who uses the internet—so, basically everyone! But seriously, stay safe out there.Got a question that you want us to answer? Send us an email at ⁠⁠offthecutpodcast@gmail.com⁠Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠⁠⁠https://streamyard.com/pal/c/5926541443858432⁠  ⁠⁠ ⁠-------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠⁠⁠⁠https://www.patreon.com/offthecutpodcast⁠  ⁠⁠⁠-------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠⁠⁠-------------------------Pick Up Some Merch!Windbreaker - ⁠⁠⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠⁠⁠   -------------------------Follow ZacInstagram - ⁠⁠⁠⁠⁠https://www.instagram.com/zacbuilds⁠ YouTube - ⁠⁠⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠⁠⁠  -------------------------Follow EricInstagram - ⁠⁠⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠⁠⁠ YouTube - ⁠⁠⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠⁠  ⁠-------------------------Follow Deric@PecanTreeDesign everywhere⁠⁠⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠⁠⁠ ---------------------------Shoutout to:KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠⁠kmtools.com/SPENCLEYDESIGNCO⁠ And ⁠WTB Woodworking⁠, our newest sponsor! Check out the giveaway over here:⁠https://www.wtbwoodworking.com/giveaway⁠ #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

On episode 177 of the Off The Cut podcast, we go shot for shot, we jump right into some hot topics from the tool and content creation worlds. Kicking things off by talking about J-Katz new video and the importance of content warnings for, well, graphic injuries.Then, we got to the news of the week: Kreg is coming out with a new line of cordless power tools, including a cordless pocket hole joiner. Naturally, we had to check out the details on their Instagram and website, which led us to wonder if this new battery platform is truly worth it. This sparked a much bigger discussion about the blurry line between inspiration and just plain copying.We dove deep into the ethics of taking ideas from others. We compared it to classic tools, asking why it’s fine for everyone to make a screwdriver but not a unique creation like a pocket hole jig. It turns out that some power tools, like the track saw, have become so commonplace that their designs are almost a "public entity". But where does that leave creators?We debated whether it's okay to make a video inspired by someone else's work without giving them credit. We've all seen videos that look suspiciously familiar, and sometimes a simple acknowledgment goes a long way. We ultimately concluded that intent is everything and that it's a good idea to borrow from multiple sources to avoid a direct copy. As one listener perfectly put it, “if you just keep copying others, people will eventually see right through it.”Got a question that you want us to answer? Send us an email at ⁠⁠offthecutpodcast@gmail.com⁠Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠⁠⁠⁠https://streamyard.com/pal/c/5926541443858432⁠⁠  ⁠⁠ ⁠-------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠⁠⁠⁠⁠https://www.patreon.com/offthecutpodcast⁠⁠  ⁠⁠⁠-------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠⁠⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠⁠⁠⁠-------------------------Pick Up Some Merch!Windbreaker - ⁠⁠⁠⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠⁠⁠⁠   -------------------------Follow ZacInstagram - ⁠⁠⁠⁠⁠⁠https://www.instagram.com/zacbuilds⁠⁠ YouTube - ⁠⁠⁠⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠⁠⁠⁠  -------------------------Follow EricInstagram - ⁠⁠⁠⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠⁠⁠⁠ YouTube - ⁠⁠⁠⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠⁠⁠  ⁠-------------------------Follow Deric@PecanTreeDesign everywhere⁠⁠⁠⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠⁠⁠⁠ ---------------------------Shoutout to:KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠⁠⁠kmtools.com/SPENCLEYDESIGNCO⁠⁠ And⁠ ⁠WTB Woodworking⁠⁠, our newest sponsor! Check out the giveaway over here:⁠⁠https://www.wtbwoodworking.com/giveaway⁠⁠ #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

The full crew is finally back! In this week's episode, join Zac, Deric, and Eric as we dive into a wide-ranging discussion covering everything from our latest projects to the business of content creation. Zac shares his journey of switching his entire cordless tool collection to DeWalt, revealing the strategic deals he's making on Facebook Marketplace. This sparks a lively debate on the pros and cons of cordless tools, particularly the notoriously frustrating cordless sanders. Zac shows off the final version of his 3D-printed soldering fume extractor, and Deric and Eric offer some great advice on making products more marketable for the maker community. We also touch on Eric's massive drawer box course project, the challenges of creating detailed, long-form educational content, and the importance of having a robust content strategy. Plus, we answer a LIVE chat question about using power tool batteries to run camera equipment for YouTube videos. Tune in for insights on DIY projects, YouTube growth, and a peek behind the curtain of the creator economy!Got a question that you want us to answer? Send us an email at ⁠⁠offthecutpodcast@gmail.com⁠Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠⁠⁠https://streamyard.com/pal/c/5926541443858432⁠  ⁠⁠ ⁠-------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠⁠⁠⁠https://www.patreon.com/offthecutpodcast⁠  ⁠⁠⁠-------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠⁠⁠-------------------------Pick Up Some Merch!Windbreaker - ⁠⁠⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠⁠⁠   -------------------------Follow ZacInstagram - ⁠⁠⁠⁠⁠https://www.instagram.com/zacbuilds⁠ YouTube - ⁠⁠⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠⁠⁠  -------------------------Follow EricInstagram - ⁠⁠⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠⁠⁠ YouTube - ⁠⁠⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠⁠  ⁠-------------------------Follow Deric@PecanTreeDesign everywhere⁠⁠⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠⁠⁠ ---------------------------Shoutout to:KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠⁠kmtools.com/SPENCLEYDESIGNCO⁠ And ⁠WTB Woodworking⁠, our newest sponsor! Check out the giveaway over here:⁠https://www.wtbwoodworking.com/giveaway⁠ #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

This week, Eric is on vacation and Deric gets big thanks for his genius idea that helped Zac perfect his 3D-printed soldering fume extractor, making it solid and adjustable with just 2 thumb screws. Zac is also deep into a tool-buying spree, playing "day trader" on Facebook Marketplace to switch all his tools to DeWalt. Did he make the right choice? We dive into the world of tool reviews, discussing how free tools can unknowingly bias creators and the refreshing honesty of some channels.Deric shares his current woodworking projects, including building a platform bed for his daughter's closet and custom shelving for his son's retro game console collection. This leads to a deep dive into the fascinating world of vintage game consoles, from the elusive N64 disc drive to the N64 that was contained entirely in its controller. We reminisce about old games, the Beanie Baby craze, and the nostalgia of classic game smells. Got a question that you want us to answer? Send us an email at ⁠⁠offthecutpodcast@gmail.com⁠Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠⁠⁠https://streamyard.com/pal/c/5926541443858432⁠  ⁠⁠ ⁠-------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠⁠⁠⁠https://www.patreon.com/offthecutpodcast⁠  ⁠⁠⁠-------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠⁠⁠-------------------------Pick Up Some Merch!Windbreaker - ⁠⁠⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠⁠⁠   -------------------------Follow ZacInstagram - ⁠⁠⁠⁠⁠https://www.instagram.com/zacbuilds⁠ YouTube - ⁠⁠⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠⁠⁠  -------------------------Follow EricInstagram - ⁠⁠⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠⁠⁠ YouTube - ⁠⁠⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠⁠  ⁠-------------------------Follow Deric@PecanTreeDesign everywhere⁠⁠⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠⁠⁠ ---------------------------Shoutout to:KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠⁠kmtools.com/SPENCLEYDESIGNCO⁠ And ⁠WTB Woodworking⁠, our newest sponsor! Check out the giveaway over here:⁠https://www.wtbwoodworking.com/giveaway⁠ #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

Zac is back from his European adventures, and we immediately put him on the hot seat to confirm he didn't elope (spoiler: he didn't, but it crossed their minds!). We also dive into the wild world of online shopping, discussing everything from oddly specific Amazon cutting board kits to the wild and wacky items (and mini smartphones!) we've discovered on Temu(or is it TeEmu? Timoo? No one knows)We also share some behind-the-scenes insights, like Eric's ongoing battle with contracts, Deric's clever 3D-printed solutions for woodworking dilemmas , and Zac's encounters with content impersonators on TikTok. Plus, we get into the nitty-gritty of audio treatment for recording spaces and the ever-evolving landscape of YouTube and content creation. Got a question that you want us to answer? Send us an email at ⁠offthecutpodcast@gmail.comBe sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠⁠https://streamyard.com/pal/c/5926541443858432  ⁠⁠ ⁠-------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠⁠⁠https://www.patreon.com/offthecutpodcast  ⁠⁠⁠-------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠⁠-------------------------Pick Up Some Merch!Windbreaker - ⁠⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠⁠   -------------------------Follow ZacInstagram - ⁠⁠⁠⁠https://www.instagram.com/zacbuilds YouTube - ⁠⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠⁠  -------------------------Follow EricInstagram - ⁠⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠⁠ YouTube - ⁠⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠⁠ TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠  ⁠-------------------------Follow Deric@PecanTreeDesign everywhere⁠⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠⁠ ---------------------------Shoutout to:KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠kmtools.com/SPENCLEYDESIGNCO And WTB Woodworking, our newest sponsor! Check out the giveaway over here:https://www.wtbwoodworking.com/giveaway #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

This week, with Zac still MIA, Scott Walsh fills in for a record 7th time! (and the second longest Aftershow ever!)This week, Scott dives deep into the power of email marketing for content creators, sharing insights on building high-quality email lists, leveraging lead generators (like free e-books and tool guides), and achieving impressive conversion rates. He explains how to "groom" an email list to ensure high open rates and avoid spam folders, emphasizing the importance of providing value and maintaining a personal touch in emails.The conversation also touches on the evolution of YouTube as a platform, the increasing use of QR codes in videos for calls to action, and the benefits of creating evergreen digital products like courses. Scott shares his process for scripting courses and how diversified income streams reduce stress for content creators. As we round out the hour, the hosts commiserate over the ever-growing expenses of running a small business, from subscriptions to insurance.Tune in for valuable tips on growing your online presence and managing the business side of content creation!Got a question that you want us to answer? Send us an email at ⁠offthecutpodcast@gmail.comBe sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠⁠https://streamyard.com/pal/c/5926541443858432  ⁠⁠ ⁠-------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠⁠⁠https://www.patreon.com/offthecutpodcast  ⁠⁠⁠-------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠⁠-------------------------Pick Up Some Merch!Windbreaker - ⁠⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠⁠   -------------------------Follow ZacInstagram - ⁠⁠⁠⁠https://www.instagram.com/zacbuilds YouTube - ⁠⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠⁠  -------------------------Follow EricInstagram - ⁠⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠⁠ YouTube - ⁠⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠⁠ TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠  ⁠-------------------------Follow Deric@PecanTreeDesign everywhere⁠⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠⁠ ---------------------------Shoutout to:KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠kmtools.com/SPENCLEYDESIGNCO And WTB Woodworking, our newest sponsor! Check out the giveaway over here:https://www.wtbwoodworking.com/giveaway #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

This week, with Zac MIA, we are joined by guest Keith Johnson for Episode 172 of "Off The Cut"! This week, Eric continues his grievances with the Shaper Origin's finicky tape and its inability to cut perfectly straight lines. As well as his own planer woes, noting inconsistent feeding on the left side.The discussion shifts to the challenges of installing inset drawer fronts and a preference for Soliche drawer slides over Blum. We also delve into contractor quality and the frustrations of home renovations, highlighting issues like poor trim work and unpainted balusters. Keith explains his decision to drop his contractor's license due to new bond requirements. Do Woodworkers make the worst customers?Got a question that you want us to answer? Send us an email at ⁠offthecutpodcast@gmail.com ⁠Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠⁠https://streamyard.com/pal/c/5926541443858432 ⁠⁠ ⁠-------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠⁠⁠https://www.patreon.com/offthecutpodcast ⁠⁠⁠-------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠⁠ -------------------------Pick Up Some Merch!Windbreaker - ⁠⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠⁠ -------------------------Follow ZacInstagram - ⁠⁠⁠⁠https://www.instagram.com/zacbuilds ⁠⁠⁠⁠YouTube - ⁠⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠⁠ -------------------------Follow EricInstagram - ⁠⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠⁠ YouTube - ⁠⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠⁠ TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠  ⁠-------------------------Follow Deric⁠⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠⁠ ---------------------------Shoutout to:KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠kmtools.com/SPENCLEYDESIGNCOAnd WTB Woodworking, our newest sponsor! Check out the giveaway over here:https://www.wtbwoodworking.com/giveaway#Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

This week we welcome our newest sponsor, Bill Burkle at WTB Woodworking, who's absolutely crushing it with his expanding physical store and a huge Wagner moisture meter giveaway. Plus, Bill drops a Fusion 360 shortcut on Eric that just might change everything for your CAD game! Then, it's grievance time! From the Shaper Origin's finicky tape and their adequate customer service to the never-ending museum display stands Deric has been working on; it's a delicate dance of setting clear expectations to avoid future headaches and backing yourself into a corner with the build. A topic tease into the blurry line between "inspiration" and "ripping off" in the creative world. How similar is too similar? We try to figure it out!Got a question that you want us to answer? Send us an email at ⁠⁠offthecutpodcast@gmail.com⁠ ⁠Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠⁠⁠https://streamyard.com/pal/c/5926541443858432⁠ ⁠⁠ ⁠-------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠⁠⁠⁠https://www.patreon.com/offthecutpodcast⁠ ⁠⁠⁠-------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠⁠⁠ -------------------------Pick Up Some Merch!Windbreaker - ⁠⁠⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠⁠⁠ -------------------------Follow ZacInstagram - ⁠⁠⁠⁠⁠https://www.instagram.com/zacbuilds⁠ ⁠⁠⁠⁠YouTube - ⁠⁠⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠⁠⁠ -------------------------Follow EricInstagram - ⁠⁠⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠⁠⁠ YouTube - ⁠⁠⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠⁠ ⁠-------------------------Follow Deric⁠⁠⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠⁠⁠ ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠⁠⁠⁠kmtools.com/SPENCLEYDESIGNCO⁠ ⁠⁠#Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

We pull back the curtain on video editing, including how we "fake it till we make it" with B-roll. We're geeking out over 3D printer filaments, especially glass-filled ABS, is it our new favorite (even if it still stinks!)? Then, things get real in the shop with a painting disaster that left Deric’s garage floor and door looking a little emo. We brainstorm ways to clean it up, including some heavy-duty razor blades and paint stripper. We get handy with outdoor power tools that have interchangeable heads – total game-changers for yard work. What is the cost of perfection? How to navigate tricky client expectations. And finally, we give a sneak peek at upcoming videos, including a PlayStation 5 mod. We spill the tea on how to handle sponsored content without annoying you (it's all about that natural flow!). Plus, a quick shout-out to our new favorite tool: the ultrasonic cleaner – even if it makes a terrible noise.Got a question that you want us to answer? Send us an email at ⁠offthecutpodcast@gmail.com ⁠Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠⁠https://streamyard.com/pal/c/5926541443858432 ⁠⁠ ⁠-------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠⁠⁠https://www.patreon.com/offthecutpodcast ⁠⁠⁠-------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠⁠ -------------------------Pick Up Some Merch!Windbreaker - ⁠⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠⁠ -------------------------Follow ZacInstagram - ⁠⁠⁠⁠https://www.instagram.com/zacbuilds ⁠⁠⁠⁠YouTube - ⁠⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠⁠ -------------------------Follow EricInstagram - ⁠⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠⁠ YouTube - ⁠⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠⁠ TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠  ⁠-------------------------Follow Deric⁠⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠⁠ ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠⁠⁠kmtools.com/SPENCLEYDESIGNCO ⁠⁠#Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

Eric, Zac and Deric jump right into the "painting woes" of finishing woodworking projects, discussing the pros and cons of different finishes like Rubio and the challenges of touch-ups. They also explore the confusing landscape of modern power tool branding, with humorous takes on DeWalt and Milwaukee's product lines. The conversation veers into memorable (and sometimes horrifying) renovation stories, including dealing with textured walls and unconventional demolition methods. Can you burn drywall?Got a question that you want us to answer? Send us an email at ⁠offthecutpodcast@gmail.com⁠Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠⁠https://streamyard.com/pal/c/5926541443858432⁠⁠ ⁠-------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠⁠⁠https://www.patreon.com/offthecutpodcast⁠⁠⁠ -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠⁠ -------------------------Pick Up Some Merch!Windbreaker - ⁠⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠⁠ -------------------------Follow ZacInstagram - ⁠⁠⁠⁠https://www.instagram.com/zacbuilds⁠⁠⁠⁠ YouTube - ⁠⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠⁠ -------------------------Follow EricInstagram - ⁠⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠⁠YouTube - ⁠⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠⁠ TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠⁠ ⁠ ⁠-------------------------Follow Deric⁠⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠⁠ ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠⁠⁠kmtools.com/SPENCLEYDESIGNCO⁠⁠ #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

Got a question that you want us to answer? Send us an email at ⁠offthecutpodcast@gmail.com⁠Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠⁠https://streamyard.com/pal/c/5926541443858432⁠⁠ ⁠-------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠⁠⁠https://www.patreon.com/offthecutpodcast⁠⁠⁠ -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠⁠ -------------------------Pick Up Some Merch!Windbreaker - ⁠⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠⁠ -------------------------Follow ZacInstagram - ⁠⁠⁠⁠https://www.instagram.com/zacbuilds⁠⁠⁠⁠ YouTube - ⁠⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠⁠ -------------------------Follow EricInstagram - ⁠⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠⁠ YouTube - ⁠⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠⁠  ⁠TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠⁠ ⁠ ⁠-------------------------Follow Deric⁠⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠⁠ ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠⁠⁠kmtools.com/SPENCLEYDESIGNCO⁠⁠ ⁠#Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

Got a question that you want us to answer? Send us an email at ⁠offthecutpodcast@gmail.com⁠Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠https://streamyard.com/pal/c/5926541443858432⁠ ⁠-------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠⁠https://www.patreon.com/offthecutpodcast⁠⁠ -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠ -------------------------Pick Up Some Merch!Windbreaker - ⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠ -------------------------Follow ZacInstagram - ⁠⁠⁠https://www.instagram.com/zacbuilds⁠⁠⁠ YouTube - ⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠ TikTok - ⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠ -------------------------Follow EricInstagram - ⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠ YouTube - ⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠  ⁠TikTok - ⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠ ⁠ ⁠-------------------------Follow Deric⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠ ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠⁠kmtools.com/SPENCLEYDESIGNCO⁠ ⁠#Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

We are back with a fresh episode; discussing a recent large-scale building project, working with young tradespeople and a non-profit. We also touch on the challenges of selling merch, practical tool tips (like the effectiveness of Torx screws!), and the surprising world of online shopping.Join us for conversations about woodworking, 3D printing, DIY and cross country travel.Got a question that you want us to answer? Send us an email at ⁠offthecutpodcast@gmail.com⁠Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠https://streamyard.com/pal/c/5926541443858432 ⁠-------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠https://www.patreon.com/offthecutpodcast⁠ -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠ -------------------------Pick Up Some Merch!Windbreaker - ⁠⁠https://www.spencleydesignco.com⁠⁠ -------------------------Follow ZacInstagram - ⁠⁠https://www.instagram.com/zacbuilds⁠⁠ YouTube - ⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠ TikTok - ⁠⁠https://www.tiktok.com/@zacbuilds⁠ -------------------------Follow EricInstagram - ⁠⁠https://www.instagram.com/spencleydesignco⁠⁠ YouTube - ⁠⁠https://youtube.com/@spencleydesignco⁠  ⁠TikTok - ⁠⁠https://www.tiktok.com/@spencleydesignco ⁠ ⁠-------------------------Follow Deric⁠⁠https://linktr.ee/pecantreedesign⁠⁠ ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠kmtools.com/SPENCLEYDESIGNCO ⁠#Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

What fuels our creative fire? This week, Zac and Eric explore motivation and the creator mindset, sharing what drives them to take on new projects and document the journey. You may even get an early look (or listen) at their upcoming work! No aftershow this week, we held our monthly BYOC. Join the top tier over on Patreon and get in on next month's live BYOC hangout with us!Join us for conversations about woodworking, 3D printing, DIY and cross country travel. Got a question that you want us to answer? Send us an email at ⁠offthecutpodcast@gmail.com⁠ Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠https://streamyard.com/pal/c/5926541443858432⁠⁠ -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠https://www.patreon.com/offthecutpodcast⁠ ⁠ -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠ -------------------------Pick Up Some Merch!Windbreaker - ⁠⁠https://www.spencleydesignco.com ⁠⁠ -------------------------Follow ZacInstagram - ⁠⁠https://www.instagram.com/zacbuilds⁠⁠ YouTube - ⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠ TikTok - ⁠⁠https://www.tiktok.com/@zacbuilds⁠ ⁠ -------------------------Follow EricInstagram - ⁠⁠https://www.instagram.com/spencleydesignco⁠⁠ YouTube - ⁠⁠https://youtube.com/@spencleydesignco⁠ ⁠ TikTok - ⁠⁠https://www.tiktok.com/@spencleydesignco⁠ ⁠ -------------------------Follow Deric⁠⁠https://linktr.ee/pecantreedesign⁠⁠ ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠kmtools.com/SPENCLEYDESIGNCO⁠ #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

Where's the best place to buy tools? The guys go head-to-head this week, comparing big box stores (Home Depot, Lowes), traditional hardware stores (Ace, TrueValue), and discount importers (Harbor Freight, Princess Auto). Expect strong opinions and maybe even a few disagreements! We'll also catch up on our shop projects and the joys (and frustrations) of being content creators.Join us for conversations about woodworking, 3D printing, DIY and cross country travel. Got a question that you want us to answer? Send us an email at ⁠offthecutpodcast@gmail.com⁠ Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠https://streamyard.com/pal/c/5926541443858432⁠⁠ -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠https://www.patreon.com/offthecutpodcast⁠ ⁠ -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠ -------------------------Pick Up Some Merch!Windbreaker - ⁠⁠https://www.spencleydesignco.com⁠⁠ -------------------------Follow ZacInstagram - ⁠⁠https://www.instagram.com/zacbuilds⁠⁠ YouTube - ⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠ TikTok - ⁠⁠https://www.tiktok.com/@zacbuilds⁠ ⁠ -------------------------Follow EricInstagram - ⁠⁠https://www.instagram.com/spencleydesignco⁠⁠ YouTube - ⁠⁠https://youtube.com/@spencleydesignco⁠ ⁠ TikTok - ⁠⁠https://www.tiktok.com/@spencleydesignco⁠ ⁠ -------------------------Follow Deric⁠⁠https://linktr.ee/pecantreedesign⁠⁠ ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠kmtools.com/SPENCLEYDESIGNCO⁠ #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

Eric is back! We catch up with Eric and hear all about his adventures in the American Southwest, and a new feud with a certain airline, should we just drive everywhere now? We discuss the new Katz-Moses Cleat System and drool over the new shop organization offered by our sponsor in this not sponsored tangent. Get the low down on Zac’s latest project, is there a Nintendo product left for him to modify? And, we discuss some tips for finding money in old books when Deric discusses his latest trip North(did Deric and Eric cross paths?). Join us for conversations about woodworking, 3D printing, DIY and cross country travel. Got a question that you want us to answer?  Send us an email at ⁠offthecutpodcast@gmail.com⁠ Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard:  ⁠⁠https://streamyard.com/pal/c/5926541443858432⁠⁠ -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠https://www.patreon.com/offthecutpodcast⁠ ⁠ -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠  -------------------------Pick Up Some Merch!Windbreaker - ⁠⁠https://www.spencleydesignco.com⁠⁠  -------------------------Follow ZacInstagram - ⁠⁠https://www.instagram.com/zacbuilds⁠⁠  YouTube - ⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠   TikTok - ⁠⁠https://www.tiktok.com/@zacbuilds⁠ ⁠ -------------------------Follow EricInstagram - ⁠⁠https://www.instagram.com/spencleydesignco⁠⁠  YouTube - ⁠⁠https://youtube.com/@spencleydesignco⁠ ⁠ TikTok - ⁠⁠https://www.tiktok.com/@spencleydesignco⁠ ⁠ -------------------------Follow Deric⁠⁠https://linktr.ee/pecantreedesign⁠⁠  ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com (⁠⁠kmtools.com/SPENCLEYDESIGNCO⁠ ⁠⁠) #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

While Eric tries not to get lost in the American southwest, Zac and Deric continue on with a new episode. We take the opportunity to discuss the ins and outs of being a content creator in today’s ever changing landscape. While exploring the pros and cons of short-form versus long-form content, effective strategies for growing an audience, and the challenges of navigating brand partnerships. What exactly is the long-term viability of content creation as a career? How important is an "Exit Strategy"? Whether you're an aspiring creator or simply interested in the world of online content, we try and bring our personal insight for you this and every week.Get access to Eric’s course with the exclusive Off The Cut discount, use code OTC25 at checkout: https://spencleydesignco.com/collections/courses/products/shaker-style-cabinet-door-and-drawer-front-course Join us LIVE for conversations about woodworking, 3D printing, DIY and tax evasion. Got a question that you want us to answer? Send us an email at ⁠offthecutpodcast@gmail.com⁠ Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠https://streamyard.com/pal/c/5926541443858432⁠ -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠https://www.patreon.com/offthecutpodcast⁠ -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠ -------------------------Pick Up Some Merch!Windbreaker - ⁠https://www.spencleydesignco.com⁠ -------------------------Follow ZacInstagram - ⁠https://www.instagram.com/zacbuilds⁠ YouTube - ⁠https://www.youtube.com/c/@ZacBuilds⁠ TikTok - ⁠https://www.tiktok.com/@zacbuilds⁠ -------------------------Follow EricInstagram - ⁠https://www.instagram.com/spencleydesignco⁠ YouTube - ⁠https://youtube.com/@SpencleyDesignCo TikTok - ⁠https://www.tiktok.com/@spencleydesignco⁠ -------------------------Follow Deric⁠https://linktr.ee/pecantreedesign⁠ ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com (⁠kmtools.com/SPENCLEYDESIGNCO⁠)

The guys are back and doing slightly better than last week. Join them as they discuss Zac’s big outdoor patio project with Mark Rayson and MicroPro Sienna, Eric’s new online course, Burnout when the finish line is in sight, and the ever-evolving world of online platforms like Spotify and YouTube.In this episode:Sienna Squad Project: Get the details on Zac’s upcoming three-day project with Mark Rayson and MicroPro Sienna to rebuild a restaurant's outdoor patio, working with high school students and focusing on the construction process.  Designer vs. Builder: A discussion on the challenges of working with designers who prioritize aesthetics over feasibility and managing client expectations.  Spotify's Video Push: We explore Spotify's efforts to compete with YouTube in the video space and how creators are porting their content.  YouTube Algorithm & Video Performance: Insights into how YouTube pushes videos, the importance of the initial hours for viewership, and how content performs over time. Launching an Online Course: Eric talks about launching his first woodworking course on making shaker style doors and drawer fronts, the technical hurdles faced, and the positive feedback received. Plus, get a discount code for the course!  The Creative Process & Project Fatigue: The struggle of finishing projects when the exciting engineering phase is over and the importance of crafting compelling video narratives, even if it means reshooting.  The Value of Reviews: A conversation about the role of online reviews in purchasing decisions and how to discern genuine feedback.  Get access to Eric’s course with the exclusive Off The Cut discount, use code OTC25 at checkout: https://spencleydesignco.com/collections/courses/products/shaker-style-cabinet-door-and-drawer-front-course Got a question that you want us to answer?  Send us an email at ⁠offthecutpodcast@gmail.com⁠ Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard:  ⁠https://streamyard.com/pal/c/5926541443858432⁠ -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠https://www.patreon.com/offthecutpodcast ⁠ -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠  -------------------------Pick Up Some Merch!Windbreaker - ⁠https://www.spencleydesignco.com⁠  -------------------------Follow ZacInstagram - ⁠https://www.instagram.com/zacbuilds⁠  YouTube - ⁠https://www.youtube.com/c/@ZacBuilds⁠   TikTok - ⁠https://www.tiktok.com/@zacbuilds ⁠ -------------------------Follow EricInstagram - ⁠https://www.instagram.com/spencleydesignco⁠  YouTube - ⁠https://youtube.com/@spencleydesignco ⁠ TikTok - ⁠https://www.tiktok.com/@spencleydesignco ⁠ -------------------------Follow Deric⁠https://linktr.ee/pecantreedesign⁠  ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com (⁠kmtools.com/SPENCLEYDESIGNCO ⁠ (http://kmtools.com/SPENCLEYDESIGNCO) )