Claim OwnershipSignals and Systems
Subscribed: 6Played: 106
Subscribe
© http://ocw.mit.edu; Creative Commons Attribution-NonCommercial-ShareAlike 3.0; http://ocw.mit.edu/terms
Description
The analysis of signals and systems forms a key part of many modern technologies, including communications and feedback & control. These lectures give a conceptual and mathematical introduction to the topic, covering both analog and digital systems.
License: Creative Commons BY-NC-SA
More information at ocw.mit.edu/terms
License: Creative Commons BY-NC-SA
More information at ocw.mit.edu/terms
25 Episodes
Reverse
The final Signals and Systems lecture explains how audio playback evolved from the fragile Edison cylinder phonograph to durable modern optical disks, through the application of digital signal processing concepts.
Continuing the previous discussion of AM in radio, Prof. Freeman analyzes phase and frequency modulated (PM/FM) signals, before presenting research showing improvement in optical microscopy via phase-modulated illumination.
Efficient signal transmission and reception requires wavelengths matching the size of the antenna; for speech, this requires frequencies around the GHz range. Broadcast radio developed AM and FM to produce accurate reception of multiplexed signals.
Digital audio, images, video, and communication signals use quantization to create discrete representations of continuous phenomena. Efficient transmission and reconstruction uses techniques such as dithering, progressive refinement, and the JPEG encoding.
Sampling produces a discrete-time (digital) signal from a continuous-time (physical) phenomenon. Anti-aliasing and reconstruction filters remove unnecessary frequencies while retaining enough information to reconstruct the original signal.
Three examples of Fourier transforms in action are given: removing noise from an electrocardiogram signal, using laser diffraction to calculate the groove spacing on CDs and DVDs, and determining the structure of DNA via x-ray crystallography.
Today's lecture solidifies the connections between continuous- and discrete-time Fourier series and transforms, converting between the time and frequency domains with familiar tools such as convolution, periodic extension, and sampling.
Continuing the comparison of continuous- and discrete-time signals, today's lecture discusses the DT Fourier transform, computation of Fourier series via the Fast Fourier Transform (FFT), and examples from digital image processing.
As digital signal processing components have become cheaper, traditional design problems in audio and video systems have converted to discrete-time. This lecture compares system responses and Fourier representations in discrete- and continuous-time.
The concept of the Fourier series can be applied to aperiodic functions by treating it as a periodic function with period T = infinity. This new transform has some key similarities and differences with the Laplace transform, its properties, and domains.
Today's lecture discusses an application of Fourier series, exploring how the vocal tract filters frequencies generated by the vocal cords. Speech synthesis and recognition technology uses frequency analysis to accurately reconstruct vowels.
In the next half of the course, periodic functions are represented as sums of harmonic functions, via Fourier decomposition. Linear time-invariant systems amplify and phase-shift these inputs to produce filtered output, an important new concept.
Additional examples today illustrate the use of feedback to reduce sensitivity to variable component parameters and crossover distortion in audio systems, and to control two unstable systems (magnetic levitation, inverted pendulum).
Today's lecture continues the discussion of control systems by demonstrating how feedback loops can add speed and bandwidth to the LM741 op-amp, and allow better control of a robot arm's angular position.
Bode plots are a simpler method of graphing the frequency response, using the poles and zeros of the system to construct asymptotes for each segment on a log-log plot. The Q factor affects the sharpness of peaks and drop-offs in the system.
Prof. Tedrake introduces the power and complexity of modern control systems, which use feedback to stabilize and compensate for delays and other errors. Examples are taken from his research into perching planes and other high-performance aircraft.
The response of a system to sinusoidal input gives valuable information about its behavior in the frequency domain, similar to convolution in the time domain. Eigenfunctions and vector plots are used to explore this frequency response.
In linear time-invariant systems, breaking an input signal into individual time-shifted unit impulses allows the output to be expressed as the superposition of unit impulse responses. Convolution is the general method of calculating these output signals.
Having established representations and analytical methods for discrete-time and continuous-time systems, today's lecture uses the example of a leaky tank to show how Euler and trapezoidal approximations can convert a continuous system to a discrete one.
Building on concepts from the previous lecture, the Laplace transform is introduced as the continuous-time analogue of the Z transform. The lecture discusses the Laplace transform's definition, properties, applications, and inverse transform.
Comments
Download from Google Play
Download from App Store
United States