We Built A Thing

In this episode, Mark picks up a bunch of windows...this kitchen renovation is really happening! Bruce did grab that zero-turn mower. Also, turns out, Bruce's house plans for the new house are the problem. Drew gets some panels put together for his drop leaf table. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our March giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Surfprep for sponsoring this giveaway! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Chad Green -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one New:  -Evan Dunker Support our sponsors: TOOL CODES: -MagSwitch: “WBAT” -SurfPrep: “FISHER10” -Bumblechutes: “FISHER10” -Starbond: “BRUCEAULRICH” -Brunt Workgear: “GUNFLINT10” -Rotoboss: “GUNFLINT” -Merlin Moisture Meters: “FISHER10” -Montana Brand Tools: “GUNFLINT10” -Monport: “GUNFLINT6” -Stone Coat Epoxy: Gunflint -MAS Epoxy: FLINT -YesWelder: GUNFLINT10 -Millner-Haufen Tool Co: “ULRICH20” for 20% off -SmartSquareTools.com: “FISHER10” -Camel City Mill: GUNFLINT10 -Arbortech Tools: “BRUCEAULRICH” for 10% off -HighCountryTool.com: “FISHER10” for 10% off -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark put out a new video about his sanding station. Go give it a watch here: https://youtu.be/NKoOKuOGEfA?si=PaIFFqKy2NSzFmtY Bruce changes brakes and shows his son the ropes. Drew is designing a drop leaf table for his next build. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our February giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Serious Grit for sponsoring this giveaway! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Chad Green -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one Support our sponsors: TOOL CODES: -MagSwitch: “WBAT” -SurfPrep: “FISHER10” -Bumblechutes: “FISHER10” -Starbond: “BRUCEAULRICH” -Brunt Workgear: “GUNFLINT10” -Rotoboss: “GUNFLINT” -Merlin Moisture Meters: “FISHER10” -Montana Brand Tools: “GUNFLINT10” -Monport: “GUNFLINT6” -Stone Coat Epoxy: Gunflint -MAS Epoxy: FLINT -YesWelder: GUNFLINT10 -Millner-Haufen Tool Co: “ULRICH20” for 20% off -SmartSquareTools.com: “FISHER10” -Camel City Mill: GUNFLINT10 -Arbortech Tools: “BRUCEAULRICH” for 10% off -HighCountryTool.com: “FISHER10” for 10% off -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark keeps cranking out stuff for the upcoming gun show. He even bought some leather to mess with. Bruce has a lighting problem. Drew's pup gets a fresh look. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our February giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Serious Grit for sponsoring this giveaway! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Chad Green -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one Support our sponsors: TOOL CODES: -MagSwitch: “WBAT” -SurfPrep: “FISHER10” -Bumblechutes: “FISHER10” -Starbond: “BRUCEAULRICH” -Brunt Workgear: “GUNFLINT10” -Rotoboss: “GUNFLINT” -Merlin Moisture Meters: “FISHER10” -Montana Brand Tools: “GUNFLINT10” -Monport: “GUNFLINT6” -Stone Coat Epoxy: Gunflint -MAS Epoxy: FLINT -YesWelder: GUNFLINT10 -Millner-Haufen Tool Co: “ULRICH20” for 20% off -SmartSquareTools.com: “FISHER10” -Camel City Mill: GUNFLINT10 -Arbortech Tools: “BRUCEAULRICH” for 10% off -HighCountryTool.com: “FISHER10” for 10% off -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark gets to read in peace. Drew loves snow-blowing. Bruce sweats in an attic. . Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our February giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Serious Grit for sponsoring this giveaway! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Chad Green -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one New: -Kevin Johnston Support our sponsors: TOOL CODES: -MagSwitch: “WBAT” -SurfPrep: “FISHER10” -Bumblechutes: “FISHER10” -Starbond: “BRUCEAULRICH” -Brunt Workgear: “GUNFLINT10” -Rotoboss: “GUNFLINT” -Merlin Moisture Meters: “FISHER10” -Montana Brand Tools: “GUNFLINT10” -Monport: “GUNFLINT6” -Stone Coat Epoxy: Gunflint -MAS Epoxy: FLINT -YesWelder: GUNFLINT10 -Millner-Haufen Tool Co: “ULRICH20” for 20% off -SmartSquareTools.com: “FISHER10” -Camel City Mill: GUNFLINT10 -Arbortech Tools: “BRUCEAULRICH” for 10% off -HighCountryTool.com: “FISHER10” for 10% off -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark makes some progress on the hidden door. Bruce tweaks a large rolling storage shelf. Drew is finishing up with more fancy tool holders with a video to come soon. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our February giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Serious Grit for sponsoring this giveaway! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Chad Green -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one Support our sponsors: TOOL CODES: -MagSwitch: “WBAT” -SurfPrep: “FISHER10” -Bumblechutes: “FISHER10” -Starbond: “BRUCEAULRICH” -Brunt Workgear: “GUNFLINT10” -Rotoboss: “GUNFLINT” -Merlin Moisture Meters: “FISHER10” -Montana Brand Tools: “GUNFLINT10” -Monport: “GUNFLINT6” -Stone Coat Epoxy: Gunflint -MAS Epoxy: FLINT -YesWelder: GUNFLINT10 -Millner-Haufen Tool Co: “ULRICH20” for 20% off -SmartSquareTools.com: “FISHER10” -Camel City Mill: GUNFLINT10 -Arbortech Tools: “BRUCEAULRICH” for 10% off -HighCountryTool.com: “FISHER10” for 10% off -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark made his dog kennel live. Bruce did a woodworking. Drew is making more tool holders, but with a Sword in the Stone twist. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our January giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Titebond for sponsoring this giveaway! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Chad Green -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one Support our sponsors: TOOL CODES: -MagSwitch: “WBAT” -SurfPrep: “FISHER10” -Bumblechutes: “FISHER10” -Starbond: “BRUCEAULRICH” -Brunt Workgear: “GUNFLINT10” -Rotoboss: “GUNFLINT” -Merlin Moisture Meters: “FISHER10” -Montana Brand Tools: “GUNFLINT10” -Monport: “GUNFLINT6” -Stone Coat Epoxy: Gunflint -MAS Epoxy: FLINT -YesWelder: GUNFLINT10 -Millner-Haufen Tool Co: “ULRICH20” for 20% off -SmartSquareTools.com: “FISHER10” -Camel City Mill: GUNFLINT10 -Arbortech Tools: “BRUCEAULRICH” for 10% off -HighCountryTool.com: “FISHER10” for 10% off -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark fells a split ash tree. Bruce rants about delivery. Drew buys a new camera. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our January giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Titebond for sponsoring this giveaway! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Chad Green -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one Support our sponsors: TOOL CODES: -MagSwitch: “WBAT” -SurfPrep: “FISHER10” -Bumblechutes: “FISHER10” -Starbond: “BRUCEAULRICH” -Brunt Workgear: “GUNFLINT10” -Rotoboss: “GUNFLINT” -Merlin Moisture Meters: “FISHER10” -Montana Brand Tools: “GUNFLINT10” -Monport: “GUNFLINT6” -Stone Coat Epoxy: Gunflint -MAS Epoxy: FLINT -YesWelder: GUNFLINT10 -Millner-Haufen Tool Co: “ULRICH20” for 20% off -SmartSquareTools.com: “FISHER10” -Camel City Mill: GUNFLINT10 -Arbortech Tools: “BRUCEAULRICH” for 10% off -HighCountryTool.com: “FISHER10” for 10% off -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark erradicates radon. Bruce bakes a loaf of bread. Drew gets an interesting comment on a sale on Etsy. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our January giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Titebond for sponsoring this giveaway! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Chad Green -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one Support our sponsors: TOOL CODES: -MagSwitch: “WBAT” -SurfPrep: “FISHER10” -Bumblechutes: “FISHER10” -Starbond: “BRUCEAULRICH” -Brunt Workgear: “GUNFLINT10” -Rotoboss: “GUNFLINT” -Merlin Moisture Meters: “FISHER10” -Montana Brand Tools: “GUNFLINT10” -Monport: “GUNFLINT6” -Stone Coat Epoxy: Gunflint -MAS Epoxy: FLINT -YesWelder: GUNFLINT10 -Millner-Haufen Tool Co: “ULRICH20” for 20% off -SmartSquareTools.com: “FISHER10” -Camel City Mill: GUNFLINT10 -Arbortech Tools: “BRUCEAULRICH” for 10% off -HighCountryTool.com: “FISHER10” for 10% off -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark makes a swamp cooler cover for his brother. Bruce gets piled with snow. Drew cuts down a tree. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our January giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Titebond for sponsoring this giveaway! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Brent Jarvis https://bit.ly/2OJL7EV -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Aaron Yelton -Chad Green -Ryan Talley -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one Support our sponsors: TOOL CODES: -MagSwitch: “WBAT” -SurfPrep: “FISHER10” -Bumblechutes: “FISHER10” -Starbond: “BRUCEAULRICH” -Brunt Workgear: “GUNFLINT10” -Rotoboss: “GUNFLINT” -Merlin Moisture Meters: “FISHER10” -Montana Brand Tools: “GUNFLINT10” -Monport: “GUNFLINT6” -Stone Coat Epoxy: Gunflint -MAS Epoxy: FLINT -YesWelder: GUNFLINT10 -Millner-Haufen Tool Co: “ULRICH20” for 20% off -SmartSquareTools.com: “FISHER10” -Camel City Mill: GUNFLINT10 -Arbortech Tools: “BRUCEAULRICH” for 10% off -HighCountryTool.com: “FISHER10” for 10% off -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark floods his house with a Christmas tree. Bruce surprises Rebecca. Drew goes tropical. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our January giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Titebond for sponsoring this giveaway! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Brent Jarvis https://bit.ly/2OJL7EV -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Aaron Yelton -Chad Green -Ryan Talley -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one Support our sponsors: TOOL CODES: -MagSwitch: “WBAT” -SurfPrep: “FISHER10” -Bumblechutes: “FISHER10” -Starbond: “BRUCEAULRICH” -Brunt Workgear: “GUNFLINT10” -Rotoboss: “GUNFLINT” -Merlin Moisture Meters: “FISHER10” -Montana Brand Tools: “GUNFLINT10” -Monport: “GUNFLINT6” -Stone Coat Epoxy: Gunflint -MAS Epoxy: FLINT -YesWelder: GUNFLINT10 -Millner-Haufen Tool Co: “ULRICH20” for 20% off -SmartSquareTools.com: “FISHER10” -Camel City Mill: GUNFLINT10 -Arbortech Tools: “BRUCEAULRICH” for 10% off -HighCountryTool.com: “FISHER10” for 10% off -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark quizes the guys with another round of trivia...Drew tries to redeem himself. Bruce talks about snacks he can't resist around Christmas time and going to see The Grinch in the theater with the family. Drew has the first 3D printing failure. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our December giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Titebond for sponsoring this giveaway! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Brent Jarvis https://bit.ly/2OJL7EV -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Aaron Yelton -Chad Green -Ryan Talley -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one Support our sponsors: TOOL CODES: -MagSwitch: “WBAT” -SurfPrep: “FISHER10” -Bumblechutes: “FISHER10” -Starbond: “BRUCEAULRICH” -Brunt Workgear: “GUNFLINT10” -Rotoboss: “GUNFLINT” -Merlin Moisture Meters: “FISHER10” -Montana Brand Tools: “GUNFLINT10” -Monport: “GUNFLINT6” -Stone Coat Epoxy: Gunflint -MAS Epoxy: FLINT -YesWelder: GUNFLINT10 -Millner-Haufen Tool Co: “ULRICH20” for 20% off -SmartSquareTools.com: “FISHER10” -Camel City Mill: GUNFLINT10 -Arbortech Tools: “BRUCEAULRICH” for 10% off -HighCountryTool.com: “FISHER10” for 10% off -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark has a dog kennel update and burns black walnut in his furnace. Bruce almost breaks a bit on the CNC. Drew helps someone cut out an amazingly figured clock on his OneFinity. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our December giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Titebond for sponsoring this giveaway! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Brent Jarvis https://bit.ly/2OJL7EV -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Aaron Yelton -Chad Green -Ryan Talley -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one Support our sponsors: TOOL CODES: -MagSwitch: “WBAT” -SurfPrep: “FISHER10” -Bumblechutes: “FISHER10” -Starbond: “BRUCEAULRICH” -Brunt Workgear: “GUNFLINT10” -Rotoboss: “GUNFLINT” -Merlin Moisture Meters: “FISHER10” -Montana Brand Tools: “GUNFLINT10” -Monport: “GUNFLINT6” -Stone Coat Epoxy: Gunflint -MAS Epoxy: FLINT -YesWelder: GUNFLINT10 -Millner-Haufen Tool Co: “ULRICH20” for 20% off -SmartSquareTools.com: “FISHER10” -Camel City Mill: GUNFLINT10 -Arbortech Tools: “BRUCEAULRICH” for 10% off -HighCountryTool.com: “FISHER10” for 10% off -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark is almost done with the dog kennel. He used Kreg's MortiseMate and likes it a lot. Drew is designing stuff for his new 3D printer. Bruce exposes domino tennons in his cutting board. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our December giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Titebond for sponsoring this giveaway! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Brent Jarvis https://bit.ly/2OJL7EV -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Aaron Yelton -Chad Green -Ryan Talley -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one Support our sponsors: TOOL CODES: -MagSwitch: “WBAT” -SurfPrep: “FISHER10” -Bumblechutes: “FISHER10” -Starbond: “BRUCEAULRICH” -Brunt Workgear: “GUNFLINT10” -Rotoboss: “GUNFLINT” -Merlin Moisture Meters: “FISHER10” -Montana Brand Tools: “GUNFLINT10” -Monport: “GUNFLINT6” -Stone Coat Epoxy: Gunflint -MAS Epoxy: FLINT -YesWelder: GUNFLINT10 -Millner-Haufen Tool Co: “ULRICH20” for 20% off -SmartSquareTools.com: “FISHER10” -Camel City Mill: GUNFLINT10 -Arbortech Tools: “BRUCEAULRICH” for 10% off -HighCountryTool.com: “FISHER10” for 10% off -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark has a new way of keeping birds. Bruce might be starting his candle empire. Drew tries to pay for dinner. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our December giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Titebond for sponsoring this giveaway! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Brent Jarvis https://bit.ly/2OJL7EV -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Aaron Yelton -Chad Green -Ryan Talley -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one Support our sponsors: TOOL CODES: -MagSwitch: “WBAT” -SurfPrep: “FISHER10” -Bumblechutes: “FISHER10” -Starbond: “BRUCEAULRICH” -Brunt Workgear: “GUNFLINT10” -Rotoboss: “GUNFLINT” -Merlin Moisture Meters: “FISHER10” -Montana Brand Tools: “GUNFLINT10” -Monport: “GUNFLINT6” -Stone Coat Epoxy: Gunflint -MAS Epoxy: FLINT -YesWelder: GUNFLINT10 -Millner-Haufen Tool Co: “ULRICH20” for 20% off -SmartSquareTools.com: “FISHER10” -Camel City Mill: GUNFLINT10 -Arbortech Tools: “BRUCEAULRICH” for 10% off -HighCountryTool.com: “FISHER10” for 10% off -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark's cutting boards are flying off the shelves. Bruce plants some fig trees and cuts metal. Drew is about to be in the 3D printer game. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our November giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to SUPERCLEAR EPOXY for sponsoring this giveaway! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Brent Jarvis https://bit.ly/2OJL7EV -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Aaron Yelton -Chad Green -Ryan Talley -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one Support our sponsors: TOOL CODES: -MagSwitch: “WBAT” -SurfPrep: “FISHER10” -Bumblechutes: “FISHER10” -Starbond: “BRUCEAULRICH” -Brunt Workgear: “GUNFLINT10” -Rotoboss: “GUNFLINT” -Merlin Moisture Meters: “FISHER10” -Montana Brand Tools: “GUNFLINT10” -Monport: “GUNFLINT6” -Stone Coat Epoxy: Gunflint -MAS Epoxy: FLINT -YesWelder: GUNFLINT10 -Millner-Haufen Tool Co: “ULRICH20” for 20% off -SmartSquareTools.com: “FISHER10” -Camel City Mill: GUNFLINT10 -Arbortech Tools: “BRUCEAULRICH” for 10% off -HighCountryTool.com: “FISHER10” for 10% off -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark melts some HDPE. Bruce smashes some apples. Drew designs a bathroom cabinet. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our November giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to SUPERCLEAR EPOXY for sponsoring this giveaway! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Brent Jarvis https://bit.ly/2OJL7EV -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Aaron Yelton -Chad Green -Ryan Talley -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one New: -Aaron Yelton  Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off Wagner Meters: https://www.wagnermeters.com/?ref=208 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark published his outfeed table video. Watch here: https://youtu.be/gDpW3hVYE1w?si=epn8SGB71WSi0628 . Bruce makes some ornaments. Pick some up on his website. Drew finishes the vanity and still doesn't get to film the countertop being cut. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our November giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to SUPERCLEAR EPOXY for sponsoring this giveaway! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Brent Jarvis https://bit.ly/2OJL7EV -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Chad Green -Ryan Talley -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one New: -Randall Brown -Mark Herrick -Ashley Goodwill Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off Wagner Meters: https://www.wagnermeters.com/?ref=208 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark sits out in the rain & lasers an urn. Bruce is done with craft shows & published a video about the live edge serving board. Watch here: https://youtu.be/zj_EVogkjgg?si=H_mRhcHj3vXec5Ke . Drew finished up the vanity. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our November giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to SUPERCLEAR EPOXY for sponsoring this giveaway! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks -AC Nailed It -Chad Green -Andy @ Mud Turtle Woodworks -Damon Moran-Joe Santos -Trevor -Ryan Talley New: -Seth Williams -Deby Clover -Ryan Talley Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off Wagner Meters: https://www.wagnermeters.com/?ref=208 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark is itching to go hunting. He's racing to get his new outfeed table built and video done. Bruce publishes a video about making a huge walnut butcher block countertop. Watch it here: https://youtu.be/fmY3PKyH9Fo?si=ovtx95KtYPPRzW8n . Drew's wife has an interesting shopping trip and he publishes his turning video in collaboration with Peter Brown. Watch here: https://youtu.be/51sfnfnsPtg?si=kWrl3NZplSUoAIPM . Plus, a ton more! This episode is sponsored by Oneida Air Systems! They want you to know about their Dust Deputy Low-Pro separator, available now at Lowe's! They are giving 3 of these away to our listeners...enter here: https://bit.ly/4dL5Huy  GIVEAWAY ANNOUNCEMENT!Listen for details about our October giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to MICROJIG for sponsoring this giveaway including a whole pile of goodies that you will definitely want! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks -AC Nailed It -Chad Green -Andy @ Mud Turtle Woodworks -Damon Moran-Joe Santos -Trevor New: -Joe Santos -Trevor Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off Wagner Meters: https://www.wagnermeters.com/?ref=208 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark releases an apple-launchingly good video and has quite the weekend. Bruce sees a new critter. Drew gets a visit from Peter Brown of YouTube fame. Plus, a ton more! GIVEAWAY ANNOUNCEMENT!Listen for details about our October giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to MICROJIG for sponsoring this giveaway including a whole pile of goodies that you will definitely want! T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS-Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom’s Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker’s Woodcraft -Bruce Clark -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks -AC Nailed It -Chad Green -Andy @ Mud Turtle Woodworks -Damon Moran New:-Terry W. -Tree Carcass Tweaking -Evan Dunker Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48  -use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)  Montana Brand Tools: “GUNFLINT10” Monport: “GUNFLINT6” Stonecoat: "Gunflint" gets you 10% off MAS Epoxy: FLINT YesWelder: GUNFLINT10 Millner-Haufen Tool Co: "ulrich20" gets you 20% off Wagner Meters: https://www.wagnermeters.com/?ref=208 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf  https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz Drew's most recent video: https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV Mark's most recent video: https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns Music by: Jay Fisher (Thanks, Jay!)