The folks over at Benchcrafted really know how to make tools. Jameel and everyone stand by the products they make so we don't have to worry about whether or not they're going to hold up in our shops. I think it has a lot to do with the fact that they're woodworkers too. They don't just make tools to sell them, they make tools to use them! It's very fair to say most of us associate Benchcrafted with their outstanding bench vise equipment and plans, but they also make a cool little tool that I picked up while attending the St. Charles, IL Woodworking In America Conference...The Skraper. The Skraper is more than a handy little tool for removing hardened glue from tight corners of your projects. I use mine for a number of different tasks, and it has yet to fail me!
The guys over at Bora Clamps recently introduced their latest clamping system, the Bora Wide Track Clamp Edge. A straight edge clamp that works very much like a traditional clamp with the added benefit of having a straight edge body attached to it. The beauty of a straight edge clamp is you can attach it to a surface, such as a workpiece or a tabletop/workbench and run your circular saw, router, jigsaw or most portable tools along the edge. It's a great system for those with limited space or jobsites where you don't have the luxury of large tools with fences and the like. Add to all of this the fact the Bora Wide Track Clamp has an extra wide body that will not flex while using, extra thick soft pads that can easily handle stock up to 1-1/2" thick, have the ability to angle the clamp body 22-1/2 degrees left or right while clamping or the fact that the body has a T-track system built in.
Today's episode is the 5th part of the series on the Child's dresser. We've jumped ahead a little bit as in real time I started to fall behind so I did some assembly work with the camera off. I'm trying to document as much as I can on these projects, but occasionally things kind of fall through the cracks. For the most part, today's episode covers drawer front construction from rough to finish. And glue up of the dresser top.
Today's Try It Tuesday is a look at the Czeck Edge Ruler-Stop currently available at Highland Woodworking. A handy little tool that literally fits in the palm of your hand but still has the ability to do great big things. The Czeck Edge Ruler-Stop works much like a traditional square, but with one big exception...you're not stuck with only using one kind of ruler. The vise like action of the Ruler-Stop opens to a maximum width of 1-1/4" and can accept rulers, shop made story sticks and just about anything that can fit within it's grasp. And because the sides of the body are ground flat and square to the jaws, it can easily be used much like you would a traditional square to layout lines on your projects. There's a lot the Czeck Edge Ruler-Stop can do, but you won't know until you try it out for yourself. Mine sits in my shop apron pocket so I never have to be without it. But check it out for yourself.
Today's episode is the final in the series on the Maple, Child's Dresser build. Unfortunately as will happen on this show, I did have to jump forward in time a little as I started to fall behind my original schedule to have it completed. Up to this point the vast majority of the construction has been documented, and the only thing that was left to complete was the drawers. We can come back on another episode and talk more specifically about the drawer construction, but in this episode I'll touch briefly on what I did in this project to make them. As part of the final wrap up on the build I'll touch on some of the subtle details I used to make the dresser as kid friendly as possible. Hope you've enjoyed it, and if you have any questions don't hesitate to contact me. Coming up for the next build project...the Maple, Child's Bookcase!
There are a lot of workbench accessories on the market, but typically they're either something that needs to be built as part of the workbench top and are nearly permanent components or they're small useful items, but don't have much versatility to them. A newer accessory that hit the market in the past year is the Veritas Surface Vise. It's a great tool that adds a ton of versatility and options to my less than adequate bench. The basic tool right out of the box worked amazing, and because it's removable head is designed to have shop made accessories attached...if necessary...the options for it's use increases dramatically.
We all want to kick the tires before we buy, but when it comes to certain things in life it's not always possible. Thankfully the folks at Lie-Nielsen understand this and travel across the states and into the great white north to give every woodworker an opportunity to man handle their planes, saws, chisels and more. While the events are slightly different from venue to venue, they're a lot of fun to attend!! Thanks to everyone who made it to Jeff Miller's in Chicago for the show. It was great to meet all of you and thanks for saying HI, Aiden couldn't believe people actually knew me LOL!!
There are times when I just want to make something for fun and I don't want to spend a lot of time worrying about all the details to make it right. Of course, I do want to make sure it's something I don't mind my name being associated with too! One type of project that's fun and can make a great gift for a loved one is a custom wooden sign. Whether it's an address plaque so the pizza delivery person knows NOT to miss my door once again or so help me I'll...or a humorous expression for reminding guest they're welcomed to visit but don't plan on staying long. Custom wooden signs are great projects. To make them even better and easier to knock out in your shop, Milescraft created the SignPro Kit. In the box is everything you need to make a wide variety of wooden signs, from horizontal to vertical...letters to numbers...large or small. All you need is some wood and maybe a dictionary so the neighbors don't shake their heads in disbelief, again. For the typical signs I've created with the SignPro, it's taken only minutes to have everything laid out and ready to route. Quick, simple and time well spent in the shop!
It's Safety Week 2010 and it only makes sense for this week's "Try It Tuesday" to be a safety device. A while ago we had a chance to give-away a Micro-Jig GRR-Ripper as part of our monthly schwag drawing. I couldn't just give one away without trying it out for myself, so for total openness...YES I did get one to tryout and talk about on the show. That was several months ago, and in that time I've had a chance to run the GRR-Ripper through it's paces. What are the final results and my thoughts? I LOVE IT! Why do I love it? One very specific reason...I feel safe and in control of my stock while using it. How many times can you say that about a tool that can be the difference between injury and a great day in the shop? To find out more about the GRR-Ripper, visit www.microjig.com. There's quite a few options and accessories for the GRR-Ripper, check them all out for sale at Highland Woodworking.
We're close to wrapping up SAFETY WEEK 2010 and I stumbled across a great article at WOOD Magazine's website. Not one to let a good thing slide by, I asked the folks at WOOD for permission to share it with all of you. Thankfully they said yes! Today's episode is based on the 12 point checklist mentioned in Shop Safety Checklist. It's a great read and something worth checking out to make sure you're working safe too. A huge thanks to WOOD Magazine for permission to share this with all of you!
It's another Tuesday and that means it's time for another "Try it Tuesday". This week we have the Kreg Multi-Mark, a great little multi-marking tool for a wide assortment of jobs in and out of the shop. With three possible blade positions for quick measuring and marking the Kreg Multi-Mark is a handy tool for setting up your blades and bits or creating relief lines around doors and windows for carpentry jobs. And that's just the start, I'm sure you'll find more jobs in your own shop. Checkout one today at either Amazon.com or at Kregtool.com.
Today's "Try it Tuesday" is all about my shop apron, more specifically the Leather Apron from Highland Woodworking. With it's generous proportions, it's deep flap covered pockets and it's really comfortable feel (once it's properly broken in that is) this is a great apron for any woodworker. Why would you need a shop apron? With all the little things you have laying around your benchtop, or on top of your stationary tools it's great to have a place to put them where they can be reached quickly and easily. That's exactly what a good shop apron will do. Not to mention protecting you from flying debris and keeping you from being caked in sawdust. Regardless of whether it's leather, canvas, cotton or polyester? A good shop apron will pay for itself in no time, especially when you don't have to search for your pencil or square.
Today's Try it Tuesday is the Lee Valley Handplane Screwdriver. Since the next few episodes will be continuing our discussion of hand planes, it only makes sense we need to cover some tools or accessories that go along with them. The Handplane Screwdriver is one such accessory. Unlike an ordinary screwdriver, the full length slot and brass ferrule completely grip the chipbreaker screw ensuring it won't be damaged and make it amazingly easy to tighten and loosen. Along with the easy to grip handle, the handplane screwdriver is perfect for the handplane user.
Finally returning to our discussion on hand planes we pick back up by talking about the roughest planes on the bench. The Jack Planes! This class of bench plane falls between the large jointers and the smaller smoothers, but they're the perfect size for doing rough work without wearing out the user. In the Stanley-Bailey numbering system the Jack Planes are the No.5's, No.5, No.5-1/4, No.5-1/2. But in case there's no number or it's a wooden bodied or you're just not sure, the Jack Plane is easy to identify by its size - approximately 9-12 inches in length. Again, not to long, but not to short! The Jack isn't a plane built for beauty, so if you're picking one up second hand don't be surprised if it's really, really beaten up. But don't worry, it'll work amazing.
The quickest and easiest way to improve an old hand plane is to swap out the original blade and maybe even the chipbreaker. Not that there's anything truly wrong with the original pieces, other than a little surface rust and maybe a nick or two, but if you were to hold the new old and blades side-by-side you'll quickly notice a big difference. The new blades are much thicker and therefore less likely to flex while being used and typically will hold their edge longer too. If there were any drawbacks to using the thicker blades it would be that they may fill more of the planes mouth than the original blade, but you may find in the case of a smoothing plane, this is a desirable drawback. And of course the cost of the new blades can set you back too, but it's a small price to pay for fantastic results.
Moving along with our discussion of bench planes it's time to take a look at the jointer planes. The jointers are our middle of the road tools. These are the tools we reach for once we've taken our stock from it's rough cut faces and edges, leveled out the big hills and valleys and are ready to take the material to it's final finished dimensions. The jointers are big planes that have the weight to push through knots and tricky grain with little to no effort. But they can wear you out quickly if you're not careful. Typically I use my own to prep stock for final smoothing with a smaller smoothing plane. But you can easily set one up to act very much like a smoother if you really desired the workout. To find out more about which planes are which and what kind of job they do best, visit Patrick's Blood & Gore at www.supertool.com.
Today's "Try it Tuesday" is the Veritas Jointer Fence. A great accessory for the hand plane user to help get nice square edges on your stock. Usable with almost all of the bench planes, it attaches to the body via two, strong rare earth magnets. Once attached to a plane, making square edges is a breeze and easily repeatable. Saving you time and of course aggravation when squaring up a stock's edge. I've used mine for years now and have never had a problem with it. The model featured in today's show is the regular model, but there is a version for low-angle planes too. If you're interested in ordering one for your shop, visit Highland Woodworking or Lee Valley. Please remember, every purchase you make helps to support the show! Tell them Matt's Basement Workshop sent you.
We wrap up our discussion of the bench planes today with a discussion about Smoothing Planes. Next to the Jack Planes, the smoothers are probably one of the more common planes in the shop. In the Stanley Numbering System, the smoothers are the lowest numbers, 1-4. But you can easily recognize them by their smaller size, as they're usually no longer than 9-1/2 inches in length and 2 inches wide for a model like the No.4. This is also true for the bevel-up versions of smoothers. While I prefer to use my smoothing planes primarily for final prepping of my stock for finishing, they can easily be used much like you would a Jack or Jointer plane on small stock. It's only when it comes to working large stock that they're not ideal for flattening or roughing the pieces. To learn more about the world of Stanley Hand Planes visit Patrick Leach's website "Patrick's Blood and Gore" at www.supertool.com.
Today's "Try it Tuesday" is a look at Bob Lang's "Woodworker's Guide To Sketchup". A really amazing tutorial covering just about every aspect of Google's Sketchup 3D modeling system that a woodworker would need to create stunning and detailed drawings for their next project. Bob is a great teacher, author and of course woodworker. Bob has taken it upon himself to learn as much about Sketchup as humanly possible, and for the past couple of years has been teaching woodworkers how to get the most from it. "Woodworker's Guide To Sketchup" is a fully interactive eBook that you load onto your computer and can access while using Sketchup on your next project. It's like having Bob sitting next to you while you're designing. And to add to all of this are the multiple built-in videos that highlight the topics discussed throughout and reinforce the lessen. Trust me, if you've ever wanted to learn how to use Sketchup or just dramatically improve what you're already doing with it, this is the book for you! To learn more about it, to download a preview chapter or to checkout some of the embedded videos head over to Bob's website www.craftsmanplans.com.
Long before the summer hiatus this year you might remember our last project build was a Maple Child's Dresser for a client and family friend. It was one of four pieces I was asked to build for their daughter's room. Today we're getting started with the first of a four part series that covers the construction of the next two pieces, a pair of matching Maple Bookcases with adjustable shelves. The construction is straight forward and the design is loosely based on a Shaker "style" bookcase. Clean lines, strong materials and soft edges were what I had in mind when I sat down to work up the final construction notes and drawings based on the pictures of similar bookcases they showed me. In today's episode we'll construct the sides of the bookcase and route a pair of grooves in each side panel that will house the adjustable shelving hardware I chose to use. We'll then follow up the construction portion of the video with a look at some of our shelving hardware options and even some jigs we can use to install the hardware. IN FACT...I'm digging up an old homemade jig plan that was submitted several years ago by Don Garner. To check out the plans for Don's Jig "right click and save as..." on THIS LINK. Huge thanks to Lee Valley Tools for loaning us a Veritas Cabinet 32 Cabinetmaking System and some hardware examples for today's show.