Long before the summer hiatus this year you might remember our last project build was a Maple Child's Dresser for a client and family friend. It was one of four pieces I was asked to build for their daughter's room. Today we're getting started with the first of a four part series that covers the construction of the next two pieces, a pair of matching Maple Bookcases with adjustable shelves.



The construction is straight forward and the design is loosely based on a Shaker "style" bookcase. Clean lines, strong materials and soft edges were what I had in mind when I sat down to work up the final construction notes and drawings based on the pictures of similar bookcases they showed me.



In today's episode we'll construct the sides of the bookcase and route a pair of grooves in each side panel that will house the adjustable shelving hardware I chose to use. We'll then follow up the construction portion of the video with a look at some of our shelving hardware options and even some jigs we can use to install the hardware. IN FACT...I'm digging up an old homemade jig plan that was submitted several years ago by Don Garner. To check out the plans for Don's Jig "right click and save as..." on THIS LINK.



Huge thanks to Lee Valley Tools for loaning us a Veritas Cabinet 32 Cabinetmaking System and some hardware examples for today's show.