This Episodes Questions:

Brian's Questions:

Hi guys.

Long term listener. Great pod cast.

I recent have a gotten my first 220 table saw. Grizzly 690. It works great and my router table, wood pecker P2.

I have a small shop and space always is tight.

I am thinking about buying an infra table fence with the router attachment as I can put it off to one side as my cut requirements are less than 24 inches. Mainly 12-18 inches wide as my happy space is projects within 2 ft by 4 ft.

Anything larger is handled on my Yeti Smart bench, 4x8 cutting capacity.

Guy is a big fan of incra tools and I just wonder if his opinion on what is best . 

Replace a good table saw fence with the incra one that was mentioned before and an added router table attachment or keep things separate?

What is your opinions?

Thanks for helping out and making 8 quarter effort to help.  Or 200% Paul Mitchell

First off, I really enjoy the podcast. I am a hobbyist woodworker who loves to build custom cornhole boards.

I have built some simple furniture like a coffee table using custom metal legs. I would like to make some simple wooden boxes for my adult daughters. I am think about trying box joints for my first attempt.

I have most of what I need to do this project but I don't own any chisels to clean up my work. Can you suggest a brand or set that would be affordable yet good quality that could last for future projects? Also, how easy is it to maintain the edges? Should I plan on sharpening them myself or send them out to a pro?

Thanks

John in Ohio

Guy's Questions:

Great show, I’ve asked a few questions over the years and you always have great advice.

I’m having problems when I glue up frame and panels for doors on cabinets and keeping the frame flat. This problem is exacerbated when there are two doors and they are both not flat. My joinery is square, the styles and rails and panel are all square and flat, so I know that’s not my problem.  I’m am guessing that it’s the way I’m clamping it during glue up.  I would appreciate any thought on what I may be doing wrong, or tips and techniques you use when gluing up panels.

Thanks for the help and keep up the great work!! Mike Gitberg

Could you give an explanation of your general setup and process for finishing regarding the consumables.  I feel like I am not very efficient and am wasteful during this process. For example, I just finished a shaker end table that I put a sealcoat of shellac on, and followed that with a hard wax oil. It came out looking great but I feel like there is a huge mess to cleanup after. Because of the risk of the oil self-igniting, I laid everything on my garage floor after I was done, so it could to dry.  I see that I used 8 rubber gloves, a dozen shop towels, scotch brite pads, several sheets of butcher paper and the mixing cup for the oil. Also, can I reuse the mixing cup from the hard wax oil? How would you clean out the leftover mix? Thanks for the great podcast! Jeff Hughes

Huy's Questions:

Hey guys, I’ve sent in questions before and always got great responses, but I have a strange one for you today.

I’m a teacher, and a bit of an eclectic one. I like to keep my kids on their toes wondering about me. I’ve always wanted to make a throne to keep in the room for me to lecture from, or to let kids sit on. I teach high school, so the kids are full human sized mostly and never careful, so well built is a necessity. Again, I’m a teacher, so budget friendly design is also a consideration. I have some recycled 3” square cedar posts, and other scrap, but I definitely can’t afford to go out and get 4” thick white oak or walnut. I am also a leather worker, so incorporating leather seats or whatnot is within my skills. Not afraid of carving or painting for details.

I’ve done some looking for inspiration and it just doesn’t seem folks are building thrones all that often. The only chair I’ve built is an Adirondack from plans. Any ideas, thoughts, recommendations, resources, donations? I’d especially like to at least start with dimensions to keep in mind.

Thanks, Peter

@Mr.Downing.Woodworking on Instagram

Hello all,

I have taken on a commission (from my wife) and have a few questions during my design process. For reference I am replacing and redesigning the Windham Wood Top Kitchen Island Off-White - Threshold from Target. The goal is to create more enclosed storage. I need to balance mobility and weight along with stability. This cart/island is used a lot for prepping food when we have company. I would prefer to construct the case out of solid hardwood panels for a sleeker look but I am concerned about the overall weight.

It appears that the logical solution is to use plywood and create frame and panel walls. As I have never used plywood for things other than drawers and shop furniture, I am concerned about color matching the plywood and hardwood. Is this a logical concern? I do not own a truck and would likely have to pay $75 for delivery of lumber from a local lumberyard (I live in Los Angeles). When I normally purchase hardwood, I have the guys cut it into manageable pieces that fit into my VW Tiguan.

Lastly, do you have any  ideas for the back wall of the cart? The back panel needs to be attractive as it would often be seen when the cart is moved around the kitchen. Again plywood seems to be easiest option but would require me to order the plywood for delivery. Would a back panel made out of 4/4 material planed down to 5/8 in. create weight distribution issues and risk tipping? Would there be any overall concerns with so much hardwood and seasonal movement. Living in Los Angeles, we don't get seasons but some days are definitely more humid than others.

If I do decide to order the plywood, what would be a good thickness to consider? Is 3/4in overkill or will 1/2in suffice? Thanks for any advice or insight you can provide. Jose