more than a shop Podcasts

Best more than a shop podcasts available (Last Updated Apr 2022)

PodcastsEpisodes

1

I Am All In with Scott Patterson:iHeartPodcasts

I Am All In with Scott Patterson

Twenty years ago, you met Luke Danes...backward cap, plaid flannel, pouring the coffee. For the VERY first time, Scott Patterson (aka Luke) is watching Gilmore Girls. 154 episodes and 4 movies. We'll visit Stars Hollow, Doosey's Market, Miss Patty's, Mrs. Kim's antique shop and more pop culture references than you can count. Join us whether you're Team Dean, Team Logan or Team Jess. And, we'll see if we can figure out "who's the daddy". We'll talk fast, and if you can smell snow, if Paris isn't just a city in France, and Friday night dinner is a requirement... you don't want to miss this. Finally, cell phones are allowed. Listen everywhere you listen to podcasts. I AM ALL IN, an iHeartRadio podcast.

2

Let Me Tell You About...:Tad Becker

Let Me Tell You About...

Tad Becker and a co-host share personal stories and sift through the weirdness to find the most interesting stories on the planet. Sometimes it's 'only' TIME TRAVEL CRIME and non-military history. Other times they answer the BIG QUESTIONS. The ones NO ONE has the GUTS to tackle. Like, why my peepee hard? Some example shows are: Being arrested outside of a comic shop, the more-than-a-friendship of Gilgamesh and Enkidu, shutting down Neopets, the unending terror that is Homestuck, the unending terror that is living in Russia, filming and acting in three feature length indie films, dreams with legitimate sequels and the Emperor of the United States. Each episode we find something new to gawk at with our Eagle-Eyed listeners.

3

The Diary Of A Vintage Shop Owner:Rachael Sadler

The Diary Of A Vintage Shop Owner

I started my vintage shop after finishing uni with a fashion degree & feeling lost! After falling from job to job and going backpacking for a year, I came back broke, grateful and more determined than ever to have a "job" that I loved! I started Ada's Attic Vintage with £20, it's been the most exciting, interesting & hardest thing I have ever done. My life is unpredictable, weird & mundane. I want to give you an inside look and share my highs & lows of running, building & trying to reach my lifetime goal of having the best vintage shop 🌍 I taught myself everything, unfiltered & honest.

4

More Than a Shop:Co‑operatives UK, The Co‑op, The Co‑operative College, Co‑op News, The Co‑operative Heritage Trust

More Than a Shop

More Than a Shop welcomes guests with something new and radical to say about the big issues of our day and doing business the right way. Presented by broadcaster and journalist Elizabeth Alker, each episodes covers a big topic from climate change and food, to mental health and education. The chat is lively, energetic – sometimes controversial, always entertaining. Join us as we explore how people power and co-operation can tackle some of the biggest challenges facing society. More Than a Shop is brought to you by Co‑operatives UK, The Co‑op, Co‑op News, The Co‑operative College and The Co‑operative Heritage Trust. It is produced by Geoff Bird for Sparklab Productions.

5

Mortgage Teacher with Michael Mullis:980 CFPL

Mortgage Teacher with Michael Mullis

Want to pay less and know more about your mortgage? It takes more than money to buy a good mortgage, it takes knowledge. That’s why Mortgage Teacher LTD, offers more than just brokerage services. They take the time to educate you on what to look for and shop the major banks and mortgage lenders to get you the mortgage that best fits you- and their service is FREE! Find out how they can save you time and money finding you the right mortgage and become mortgage-free sooner! Tune in: Saturdays from 11:00am-11:30am on AM980 as Mortgage Teacher’s President Michael Mullis covers a variety of topics and discussions in helping London and the surrounding area with their mortgage questions. Website- http://mortgageteacher.com/

6

Play by Play with Detail Bookie:Detail Bookie

Play by Play with Detail Bookie

Auto Detailing is more than a job; it is a community. At Detail Bookie we value that sense of community and we have something to add to it. Before we were Detail Bookie, we were detailers in a small shop in Alabama. The Detail Bookie Software has completely changed how we do business. Now that our shop and our business model has grown, we want to share some of the tips & tricks that have made our detail shop the million dollar business that it is today. So grab some lunch and join us every Friday to chat about what's happening in the world of detail.

7

Drive and Dish NBA Podcast:Justin Cousart

Drive and Dish NBA Podcast

Welcome to the Drive & Dish NBA Podcast, hosted by Kevin Rafuse (@rafusetolose) & Justin Cousart (@JustinContheAir). We started back in 2014 as a way to discuss our favorite league like we would whenever we hung out outside of work. Little did we know two ex-Pennsylvanians who moved to Florida would now be entering our 6th season. Two cities, and a couple of radio jobs later, here we are. We strive to give you the best in everything NBA both on and off the court on a weekly basis and keep it light and fun, the way basketball is supposed to be. Honestly, which league is more fun than the NBA right now? Our goal is to make you feel like you’re sitting on the couch, at the barbershop, or at a barstool with us. We cover the league year-round from opening night in October, all the way through the NBA Finals in June. If that’s not enough, we keep going in the summer for the NBA draft, NBA summer league & free agency. Segments include Who’s Ballin, Who’s Fallin, our NBA version of the stock market where we tell you what’s trending up, and what’s trending down each week. We’ve also got Hot Takes from Reddit, where we bring you the spiciest and most comical takes from NBA Reddit each week. You also will hear the best in NBA guests throughout the season and all summer long. Like we said earlier though, the show is all about fun, because if you’re not having fun, why do something right

8

Handmade Sellers:Jenny Hall

Handmade Sellers

Welcome to Handmade Sellers, THE podcast for creative entrepreneurs who want to grow their Etsy shop traffic and sales without wasting hours on social media. Your host, Jenny Hall, brings more than 10 years experience selling on Etsy, has helped hundreds of Etsy shop owners 2x-42x their sales in just a few short months, and she wants the same success for you! Through her guidance, you'll get the support you need to go from part time side hustle to full time business owner selling on Etsy - giving you the freedom to be your own boss, have more time with your family, and more time to create!

9

The Orange Cactus Coffee Podcast: Coffee | Specialty Coffee | Roasting & Brewing | Espresso Mike Kinkade & Jake Goble:The Orange Cactus Coffee Podcast: Coffee | Specialty Coffee | Roasting & Brewing | Espresso Mike Kinkade & Jake Goble

The Orange Cactus Coffee Podcast: Coffee | Specialty Coffee | Roasting & Brewing | Espresso Mike Kinkade & Jake Goble

Mike Kinkade and Jake Goble from Orange Cactus Coffee take you on a journey through specialty coffee so you can enjoy the perfect cup of coffee at home, be introduced to new and exciting cafés, learn the lingo, and enjoy coffee as more than a caffeine delivery system – but a special, unforgettable drink experience that you’ll want to duplicate and share. Discover how you can roast, brew, and enjoy your favorite coffee at home, develop your palette to enjoy coffee more, and use coffee as the catalyst to create memorable experiences. Mike and Jake freely confess they are not industry experts. They are two regular guys who enjoy coffee and want to share their passion with others who have a desire to get the most flavor out of every drop while avoiding coffee snobbery. Coffee, specialty coffee, espresso, pour-overs, Aero-press, French press, customer service, syrups, flavors, milk, cream, non-dairy coffee add ins, coffee subscription services, home roasting techniques, coffee shop hacks, and testing every coffee myth known to man will show you how they are experiencing specialty coffee and documenting the journey.

10

She’s Obsessed - The Podcast:She’s Obsessed - The Podcast

She’s Obsessed - The Podcast

Starting as a curious conversation at the @TreasureTress Pop Up Shop, with panelist’s revealing more than they intended and audience eyes welling up before they could blink, it became clear that a sacred, highly valued and necessary conversation had begun. Join London based entrepreneur Jamelia Donaldson (@jameliaisobsessed) and her network of game changing Black British Women for vulnerable, personal and often hilarious straight up talk exploring their various “obsessions”, business lessons and personal journeys.

11

Diversity & Inclusion:Diversity and Inclusion

Diversity & Inclusion

Welcome! Join us on our mission to celebrate the contributions of creatives from different backgrounds. Drop us a message about one of your favourite artists. We are more than happy to invite them on the show! For book lovers, you can support us by purchasing your books at: https://bookshop.org/shop/upendobooks We are a proud affiliate and will earn a small commission if you buy something at no cost to you!

12

Grooming Unleashed:Ryan Alvarez

Grooming Unleashed

Finally, a true grooming podcast for the grooming industry! In-depth interviews with the pet industry's finest groomers, handlers, trainers, and more! Subscribe today to listen to award-winning groomers and up-and-coming groomers and stylists, everyday shop stories, and entertaining tips and tricks to help you become better than you were yesterday. Support this podcast: https://anchor.fm/ryan-alvarez/support

13

Will's Personal Development Show for Asian American Men: Success Advice:Will Chou: Blogger and Podcaster

Will's Personal Development Show for Asian American Men: Success Advice

Your number one resource for personal development advice that does not suck. We try to stay data and science-backed and only source advice from the best in the field from millionaires and billionaires. This show is different from others because: we are not focused on excessive quantity at the risk of losing quality. We will not interview everyone who has a pulse just to put out content. We only study the best in the world. We believe that success is more than just which top performer made the most money. Success, in our books, is about happiness, fulfillment, purpose, health, family time, no regrets, having a career or business you are passion about, maintaining a great reputation, and keeping great relationships. This podcast is meant to address the big gaps in knowledge for men so that they do not fall into the same traps of making a lot of money only to find themselves unfulfilled or unhappy. Money is an important part of true success but not the only part. This is your one stop shop to discover self development, business, entrepreneurship, dating, and self improvement resources, books, and information you won't hear anywhere else.

14

The Itty Bitty Business Podcast with Ecobbshop:Emily

The Itty Bitty Business Podcast with Ecobbshop

The covid-19 crisis has led Emily to open an Etsy shop out of bored-ness, and she is not alone! Now more than ever people are creating small businesses to either get by, or to have a creative outlet. This inspired her to connect with other itty bitty business owners to hear their story and inspirations.

15

Jessie's Coffee Shop:KLRNRadio

Jessie's Coffee Shop

Coffee and books: two of my greatest loves. But there is so much more to a book than just writing. Come on in and take a load off while we enjoy some caffeine with our words. Welcome to Jessie's Coffee Shop.

16

Weight Loss for Quilters:Dara Tomasson

Weight Loss for Quilters

The Weight Loss for Quilters podcast is for quilters that find themselves hiding behind their stitching and quilts because of their constant battle with weight loss. Today’s society has made weight loss way more complicated than it needs to be but the fact of the matter is this….losing weight is like learning a new skill just like a half square triangle or learning how to free motion quilt. Join Dara Tomasson, long arm quilter turned weight loss and life coach each week as she breaks down the simple and effective way to lose weight and keep it off for good...all while creating more joy and peace in your life . Each episode is designed to help you build the skills you need to lose weight, develop a whole new level of confidence and liberate your free motion quilting skills. You may even find yourself wanting to try new things other than just going to shop hops and organizing your stash… although that never gets old. For more info on how quilters like you are losing weight and keeping it off for good visit daratomasson.com for more information.

17

Less Alone: A Podcast About Connection:Amy Moore, Anna Newell Jones, Erin Linehan

Less Alone: A Podcast About Connection

In a world where we are more in touch than ever but meaningful connections are lacking, 3 friends, Amy Moore, Anna Newell Jones, and Erin Linehan have taken their coffee shop chats to the podcast studio. Follow along at LessAlonePodcast.com Grab your FREE 6-Step Roadmap to Instant Connection: ConnectionRoadmap.com

18

Sports Medicine on Tap:Steven Frey

Sports Medicine on Tap

Steven Frey, a sports medicine board certified orthopeadic surgeon and Jason Kopec, a certified athletic trainer, will be talking about the injuries of current athletes and what those injuries may mean for the athlete. In a relaxed format, we will explain the injury, treatment options, and expected return to sport as well career impact. We will have various guests - physicians, physical therapists, athletic trainers and some athletes talking shop. Intended to be a little more light hearted than this topic is usually presented... over a couple beers.

19

Woodworking Reviews at LumberJocks.com:

Woodworking Reviews at LumberJocks.com

lumberjocks-reviewshttps://feedburner.google.com A Canadian review of the Harvey C14 Ambassador Bandsaw https://www.lumberjocks.com/reviews/12335 This is my personal review of the Harvey Industries Ambassador C14 bandsaw. Normally the pros and cons would be after the dissertation; however, in order to be hopeful that prospective users and purchasers might be interested in the experience I’ve had, I have elected to put these at the very beginning. They’re not listed by any order of importance. *I am not an employee of Harvey Industries. The company has not supplied me with any financial remuneration for posting this detailed review. I paid in full for the machine long before it was shipped from the Vancouver warehouse. PROS:1. very powerful quiet motor with instantaneous start-up to full speed2. superbly balanced3. heavy weight to dampen vibration4. cuts hardwood true without waver, in the full 14” capacity CONS:1. considerably more expensive than other similar 14” bandsaws2. more than a niggling complaint with the thrust bearings3. lower guide difficult to access for adjustment4. heavy for one person to mount on a mobile base That’s it in a nutshell. For those wanting a more in-depth view read on… The first image is the heavy-walled superb cardboard carton the machine arrived in.I first learned of Harvey Industries as a woodworking machinery maker from mainland China through James Hamilton’s Stumpy Nubs channel on YouTube where he discusses his shop’s 7 or 8 bandsaws. At the time, I owned a Rikon 14” bandsaw, the much-ballyhooed machine I purchased from Lee Valley Tools in Halifax, NS, the province I retired to from my original home province of ON. I have already posted a review of that machine above, since it was my initial post with Lumberjocks and was not placed in the proper section. I received no reply from the editors here to help move it. Oh well. The only thing needing assembly was the fence and installing the supplied levelling feet. I put felt pads on those, assuming I would be able to push the bandsaw in and out of its wall location to machine large pieces. There was no way, as it’s simply far too heavy at 390 lbs. which is what we want for vibration dampening. I have read other earlier reviews where some assembly was required with the motor and table. Harvey even equipped the AC cord with the correct plug for my 220V wall outlet. Thanks, guys & gals! Perhaps the factory uses grease on all the moving parts so as to lessen any chance of rust on the ocean going voyage or while it may be in storage at a stocking warehouse here in NA. For woodworking, we workers do not want grease, as it will accumulate fine sawdust and eventually gum up the rack and pinion movement of both the table trunion and the blade guard rise and fall mechanism. That was cleaned off. I used dry silicone spray to lubricate the affected parts, which, works just fine. The Harvey bandsaw is too tall + too heavy for a slim-lined mobile base. When finally I righted the prone saw, [and yes, I strained my back] it wobbled precariously and I feared if I attempted to resaw a log or cut a bowl blank from an off-centred log, the machine could become dangerous. This base attempt was discarded…after installation, alas. The casters that I had on hand, regardless of their approved individual rating, have soft solid rubber wheels with loose tolerances on the 1/8” axle shaft. The machine was virtually impossible to move about the lacquered engineered bamboo flooring, which, had been directly cemented to the concrete slab below. I purchased a Busy Bee Tools [outlets ‘cross Canada] adjustable angle iron mobile bass platform kit online. I supplied my own sheet goods material for the tray, plus some white ash lumber for stiffness. I also saw a YT video for joining the two moveable casters in front with a steel bar. I had some pieces of curtain rod leftover and used a piece to join the two kickdown levers. Due to the heavy weight of the saw, plus my 165 lbs, I need to jump on the bar to lock the casters in place. However, I can raise the lock lever bar with the toe of one shoe. Over the years I have rolled a 5,000 lb 24” Wadkin planer into place using the Dynastic Egyptian method of rollers sans animal grease; in that case, it was a pair of 1-1/2” hardwood dowels. With the C14, I used every block, shim and offcut I could find, to jack it up high enough with a steel bar to slide the much wider base underneath, then secure the machine to this final mobile base. It works like a charm, with no wobble and is now easily manoeuvrable. The worst adjustment pain with this excellent machine is loosening, then tightening, the thrust bearing on the lower guide block. At first, I was able to manhandle that Allen screw by a spare I have with a shorter handle. Then I came up with a simpler solution. I drilled a hole in the soft cast iron table, beneath the table insert for the original key. Works like a charm. One wonders if this has voided the warrantee. hahaha Our Canuck Looney or one dollar coin, has 11 sides. Each facet is less than 1/4” wide. Shown is the bandsaw running with a 3/8” blade; the coin balancing perfectly—-no vibration. That’s how good this machine is! My 12 year old Steel City dust collector @ 1.5 HP is a 220V machine that came with twin 4” port adaptors. ‘Sides, as a hobbyist now, there’s no hurry keeping two machines running simultaneously to speed production. I’ve converted all machines that allowed 220V to that higher voltage as they run cooler, are more efficient, i.e., coming up to full RPMs faster, yet not more powerful. An amp is still an amp. I swapped the twin 4” ports out for a single 6” adaptor, since I want volume and not velocity. The poly hose, also 12 years old, has been delaminating for some time from the interior copper coils. It was dear then; a new one is outta range dollar wise. There must be limits, eh? hahaha I added a cheap 6” rubber hose to extend the distance to machines with adaptor and ring clamps. This shop is only 425 sq. ft and needs no room dust collection. The C14 provides for two dust location pickups. Few bandsaws in this throat capacity allow for that. Neither my old British 27” Wadkin nor the also older Québec 24” Poitras had two dust outlet pickups. Both locations on the C14 are excellent. Initially, I had the Y reversed, which, meant the dust collector would draw first from the floor of the lower driven wheel cabinet. Once reversed so that the pickup is as close as possible under the table, one can see that the cabinet is virtually dust free, with only a 1.5 hp collector. I left the slinky pipe extra coils for wear plus a smooth inside surface, so the pickup air would not be slowed down. Once an F1 fan, always an F1 fan…not exactly bellypan downforce. This next point is an old trick I learned decades ago from a mentor. Take any old grinding stone. While the saw is running, kiss each back corner of the blade to slightly round it over. This presents less wear to the bearing due to less surface area in contact. It also allows the blade to turn corners with less grab. A final addition is to use a blade lubricant to assist in keeping the blade cool; which, is more helpful in dense hardwoods. This is my biggest niggle with this machine. What the manufacturer has done, is press a decent hardened steel bearing into a soft steel bushing or case. Within a few minutes of use, the thrust wheel bearing encasement has been deeply scored. I was told in an email by a customer service rep., that this was done to draw heat away from the blade. This presents problems with turning in cuts; as well, my logic tells me that this would increase the heat of the blade, due to more constant friction through contact, not less. The original bearings are the most ubiquitous skateboard wheel bearings found anywhere. Cheap! Our economic system’s mania for cutting costs. In this image, the reader can see what I have done. I went to an industrial supply house and bought some bearings that were close enough to the original encased designs in OD. I then went to a local machine shop and had them make bushings that would reduce the ID and allow the assembly to slide onto the factory “peg”. I used a larger washer and enlarged screw heads to hold the bearings in place. Eh voilà, as my Francophone compatriots would say. It works like a charm. The C14 allows re-positioning of the bearing width to be exactly in the centre, to support the blade push. This is my depiction of the lower thrust bearing replacement with “peg” bushing installed. Again, this is an image of the superior replacement bearings in place with setting the side bearings behind the tooth gullet and leaving a gap behind the blade at rest of only a paper’s thickness. This shows what was done to allow no painful adjustment of lower thrust wheel block assembly. I had hoped this lever lock and larger rotating hand wheel with ‘peg’ would improve the rise and fall of the blade guard. Alas, they did not. The problem is the ratio of the gearing. One revolution = 3.5”, which, in my estimation, is excessive. Perhaps they were saving cast steel? If it was half that, then the hand wheel would be easier to use for anyone, let alone we seniors with atrophyin’ arm and hand muscles. hahaha The table rise and fall works very well as is with the assistance of the shock absorber for lowering. One of these must’ve fallen out enroute from the factory to me. They hold the round bar into the guide block and must be tightened after side bearing adjustment. These screws are not mentioned in the owner’s manual in the parts breakdown; a small oversight. I learned of the problem, because the piece I was cutting became stuck as the screw dropped lower. These setscrews are an easy find at any industrial supply. Harvey America sent new ones, but, with the US Parcel Postal Service being privatised by slowing delivery and raising prices, the tiny package took nearly a month to arrive from California to NS where I reside. This is a handy table insert, so make a few with your setups. What happened is that this machine is so powerful, the blade pulled a small piece down through the factory table insert, bending a brand new blade, making it useless. $35 wasted. Know better, John. You can see the slight removal of red anodizing on the edges of the original table insert. I use Timber Wolf blades from NY which are the cream of the crop from my over 55 years of experience. I found out ‘bout this brand from watching Ashley Harwood, a turner par excellence in Charlotte NC, eye candy for us codgers. hahaha The incredible accuracy of this cut makes woodworking a true pleasure. That’s what we designer/makers long for. The straightness and consistency of the cut is without parallel, if you will allow me that metaphor. We want accuracy and consistency. The C14 delivers in spades. Good science uses repeat mechanisms for ascertaining the validity of the original findings. This is a rip cut with the grain, in NS yellow birch, using the full 14” capacity of the C14. It does the job! I was fearful of putting excessive tension on this 3/4” blade, since it was the only one I had purchased from Timber Wolf. That is why there are some shallow ripples from the cut. The wood is highly flame figured to boot. What more can one ask for? Again, this is a 12” curved cut showing the versatility on curve cuttings in the same NS yellow birch, this time across the grain. The radius is 11.5” the smallest radii for a 3/4” blade. One final niggle, the C14 has no post mounted 110/220V accessory plug outlet as does the 14” Rikon. It was very handy for direct powering the LED sewing light with magnetic base, I purchased from Jeff at Ammy; the lamp is dual voltage dream. I rigged an extension cord and soldered the leads together. I pulled the join apart three times moving this beast, forgetting that the C14 was not the Rikon 14. hahaha Perhaps if I had more electrical skills, a surface mounted plug wired into the magnetic starter could have been added. Oh well…“https://www.amazon.ca/gp/product/B07PZS5PZF/ref=ppxyodtbsearchasintitle?ie=UTF8&psc=1” In sum, I am thrilled with this machine, of course, with the few minor caveats listed, that are easily user rectified on site, with minimal outlay of expense and time. Thanks for your time in reading. Wed, 15 Jun 2022 21:55:56 GMT https://www.lumberjocks.com/reviews/12335 jayoh jayoh Efficient Use of Expensive Wood--Easy Layout Online Tool https://www.lumberjocks.com/reviews/12334 I’m not sure how I discovered optiCutter.com—but it’s already saved me money. It’s super easy to input the kind of and dimensions of the sheet goods you’re using (you could use it for boards, too), add the dimensions and number of parts you’re cutting out, input your kerf width and… CALCULATE! Super quick, super efficient, very accurate and easy. You can get a free account, and that’s all I have—not sure I’d ever need a full paid account as a hobbyist—but it’s truly already saved me a few dozen dollars in efficiently using my plywood, melamine, MDF… whatever. With the cost of these materials being what they are, there’s no reason not to give them a shot. Thu, 09 Jun 2022 00:24:02 GMT https://www.lumberjocks.com/reviews/12334 jayseedub jayseedub It was a jointless purchase... https://www.lumberjocks.com/reviews/12332 Has anyone else purchased this jointer? I picked it up last October (2021) for the hard price of $450 (CAD). Having owned many Craftsman tools over the years.. I figured… what could go wrong?!? I have used it for two projects, rough estimate, 2 dozen passes, not including the out-of-the-box-test/play time passes. I should actually 1 and 7/8 projects. The last few ‘joints’ where completed on the table saw with a quick made shop jig. I read a little further into these machines, to find, woh is me… that they typically last a few months before just stopping. No hiss, no fizzle, no sparks, no smoke noises or barks… just stop operating. Retailer said they would not take it back or exchange it, and craftsman, after almost a month has emailed me asking for all the information I supplied to them the day the machine broke. Thud. That was my confidence falling to the floor…Let’s see what Craftsman says… In the meantime, I suggest staying away from these pretty, red paperweights, dust collectors, coffee cup holders… at least until they stop installing this most frustrating feature. Cheers all Charley Mon, 30 May 2022 20:38:21 GMT https://www.lumberjocks.com/reviews/12332 The_Other_Charley The_Other_Charley Love the steel. Hate the handles. https://www.lumberjocks.com/reviews/12331 Decided to write this review because I bonked my head on the bench again while bending over to pick up a chisel that had rolled to the floor again. The steel in these chisels is nice. And socket chisels are good in that it’s easy to remove and replace the handles, which I find I have to do with all of the smaller sizes (anything smaller than 1/2 inch) which tend to roll away if placed on a surface that isn’t completely level. Luckily, the fix is pretty easy. Pop the handle out (easy in New Mexico, where the wood dries out so much they shrink), take it to the belt sander, and put on some flats. Done and done. Much better now! Sun, 29 May 2022 16:44:04 GMT https://www.lumberjocks.com/reviews/12331 Dave Polaschek Dave Polaschek Great miter gauge but not without issue https://www.lumberjocks.com/reviews/12330 I’ve had this miter gauge for a while and I’ve generally liked it really well, save for one thing: The nylon expansion discs don’t really work very well. Too much slop in the miter slot allowing it to move around too much. The problem: Incra made the milled recess exactly the same diameter as the expansion discs, and when you put in the countersunk screw that is supposed to push the disc apart, it can’t because one half of the disc is locked in by the milled recess and can’t move outward. This makes is so the screw also can’t push out the other side to tighten your miter slot fit. What is needed is more room within the milled recess. The fix: First make sure the expansion discs are rotated to one end of the milled opening as the directions say.Then make a mark on the disc at the other end of the opening. Then remove the expansion disc and use a wheel grinder to remove just a sliver of plastic, starting from the split and continue the long way around to where you made the mark. This should be a little less than 3/4 of the circumference of the disc. Only remove a very small amount. This gives some room for the disc to move apart in both directions away from the screw when the screw is tightened. See below picture. Note how far the split is now. No milling or drilling any metal required, only grinding on replaceable nylon discs. I did this on all three expansion discs and now the bar is as tight as I want it to be, I can adjust with the screw now for a custom fit. The bar is solid in the slot and I have no sideways movement. This is the fix I needed to do for several years. Cheers! Wayne Sat, 21 May 2022 23:52:01 GMT https://www.lumberjocks.com/reviews/12330 ic3ss ic3ss TSG-FDC Overarm dust collector: Poorly designed hood—no better than the standard https://www.lumberjocks.com/reviews/12329 The standard included blade guard works just as well as the expensive add on dust collector hood as far as dust collection is concerned. From the SawStop manual: “The design of the blade guard creates such a powerful airstream that it effectively removes dust even without a vacuum system connected.” But’s that’s a quote about the standard included blade guard with a measly 1.25” port. Too bad this advanced design doesn’t apply to expensive add-on overarm dust collection sold by SawStop that has a 4” port connection. Note that on the TSG-FDC there is a big gap—1” high and 3” wide—-right in front of the hood. And of course it throws a lot of dust forward right into your face. This is a design? The advantage of the Overarm model is that it’s easy to push out of the way, and you don’t need to remove if you are not cutting all the way through the wood. And the Overarm is easier to see into, which is important. As far as dust collection is concerned, big disappointment. Sun, 15 May 2022 03:12:41 GMT https://www.lumberjocks.com/reviews/12329 Sark Sark Pretty Good Circle Cutting Jig https://www.lumberjocks.com/reviews/12328 Yeah, I know—I could make one of these myself—but I was interested in what I hoped would be both the versatility and precision of a manufacturer-made-and-designed jig. After using it for a few days I’m a little disappointed. It’s made well enough, and assembly was easy. Instructions were fine, but not great. It comes with everything you need, including a drill bit to drive your centering hole, a centering pin for your router’s setup, and even a screw to mount the jig into the centering hole. And a router bit. The router affixes to the jig securely and easily, locks in, and it’s a solid registration—good fit-and-finish with that. It comes with two “arms” that allow one to route small and very large circles. It’s not too difficult to figure out how to use it, and it works well. So the disappointment comes just around the fringes. 1) It’s hard to be precise. Part of the problem is that the scale measures the diameter of a circle, and therefore the measurements on the scale are 1/2-scale (since it functions as a radius around a point when it’s cutting). That’s a big deal because each mm marking can’t be shown because it’d actually have to be 1/2 of a mm in the actual scale. So, because it’s too small to mark actual mm, it displays hash marks every “two” mm (which is actually 1 mm in the scale, actual measurement—get it?). Forget about trying to measure in 1/16 of an inch. That makes it really hard to be precise. 2) Even if it DID measure a radius on the scale, it’s still not even accurate. Set it to 68mm, and it cuts about a 71 mm circle. At its most precise it’s at least 1 mm off the actual size (inside, and outside diameters). Outside measurements were up to 2.5 mm too large. Maybe the router bit supplied is too big. Maybe the scale is adhered in the wrong place. Whatever it is, you can’t trust the scale. Measure three times seems to be the rule for this tool. 3) The pivot point that gets screwed to your workpiece is plastic. The arms are aluminum, but the point that gets all the wear and tear is plastic. The pivot hole rides on a metal screw that you screw into the pivot point. It seems fine so far, three days and fourteen holes in, but I can see it rubbing against the screw over weeks and months and enlarging the hole over time. Right now that’s just a fear and a worry—but it seems like a risk, anyway. It works. But you have to know its limitations. And frankly the scale is a mistake. It should display the RADIUS for bigger markings as well as more ability to be accurate. I may decide to put my own adhesive tape over the already-installed one to do it right, but I shouldn’t have to do that. Sat, 14 May 2022 23:16:55 GMT https://www.lumberjocks.com/reviews/12328 jayseedub jayseedub KP0800K 4.5 stars https://www.lumberjocks.com/reviews/12327 Nice little planer. High RPM rate (17000) to weight (5.7 lbs) Good balance. Ergonomically sound. Dial in depth gauge in front turns both counter and clockwise but depth only changes if turned clockwise. Also it goes past ‘0’ for some reason. Don’t like that. But the material removed is what dial says it will be. (-) .5 star for dial mechanism. $169 for planer, case, fence, blade gauge and wrench Wed, 27 Apr 2022 22:22:46 GMT https://www.lumberjocks.com/reviews/12327 1thumb 1thumb A (nearly) magnificent throne for the shop https://www.lumberjocks.com/reviews/12326 Far superior to any other rolling shop stool I’ve bought, the DeWalt heavy duty rolling shop stool is pretty great. It supports me at a comfortable height (a few inches higher than the Craftsman stools I previously used), has a generous tray under the stool, and rolls (mostly) smoothly around the shop. The only thing that keeps it from being perfect are the wheels, which are small enough that they’ll hit a wood-chip on the floor and screech to a halt, threatening to tip me over. Larger wheels would be better. Or I could clean up the shop more often. So yeah, larger wheels would be better. I also could do without the little raised bit at the back of the stool. A flat seat is fine, and all this one ever does is be facing the wrong way when I try to sit down. A minor problem, less bad than the wheels, but still a minor annoyance. Mon, 25 Apr 2022 16:12:26 GMT https://www.lumberjocks.com/reviews/12326 Dave Polaschek Dave Polaschek Nice little saw for lumber prep https://www.lumberjocks.com/reviews/12325 I bought the Grizzly G0948 10 inch 1/2 HP Bandsaw saw after I had some problems with the tension adjustment on my Delta 14 bandsaw and needed to order spare parts. Initially I was planning to buy something bigger as a dedicated resaw bandsaw, but our driveway is gravel, and all the bigger bandsaws are freight delivery, which means they’ll drop it off 50 yards from the shop. So I looked smaller. The Grizzly 10” 1/2HP bandsaw is small enough to be delivered by UPS. And it’s small enough that it’s easy for one man to set up, though having some help when it comes time to set it on the stand is probably a good idea. Once set up and connected to a dust collector, I gave it a try. While I thought I would be in a hurry to get my Delta 14 up and running again for big jobs, I’ve been happily surprised by how capable this saw is. I’ve been doing a lot of lumber prep with it, and it does a great job on simple cross-cuts and rips. It’ll cut a curve too, but the stock blade is a 3/8 blade, which isn’t great for curves. But the best surprise has been resawing with this little guy. I’ve been resawing quite a bit of small stock, including things like 1/8” thick by 3” wide quartersawn pieces of oak cut off a 12/4 flat-sawn board. As long as I keep the feed slow enough that it doesn’t bog, I can go from the bandsaw to usably flat lumber pretty quickly. A 1/8” thick resawn piece of QSWO will finish out at 3/32 when I’m done flattening it. That keeps the cheap bastard in me happy, since I’m not wasting a lot of wood to a wandering kerf, and I still haven’t gotten around to ordering the parts for my Delta. Grizzly’s 1/2” resaw blade works pretty well too, but I’m mostly sticking with the stock 3/8 blade that came with the saw for now. I figure I’ll use it until it’s too dull to cut well before I switch to the half-inch. Switching blades isn’t easy, and adjusting the blade tension means some fussing around, but I’ve had no problem with the tension changing during use. It’s almost set and forget. Dust collection, at least with a Harbor Freight 1HP 4” dust collector, has been great too. There’s a small amount of dust that gets left on the table, but most of it is picked up by the dust collector. Nothing like my Delta 14 which filled the air in the shop with dust no matter what kind of dust collection I connected to it. The little gooseneck light that’s built into the saw is handy. I sometimes forget to shut it off, but it’s an LED so it doesn’t use much juice when I do forget. The blade guide adjustment is easy to operate. The guides are ball-bearing, and came set up pretty darned close from the factory, but a little adjustment got them right on. Out of the box the kerf would wander a bit, but after adjust the guides, it’s pretty much right on. The included manual is pretty good. You can check it out for free on Grizzly’s website if you’re interested, which I did before buying. The only complaint I have about this saw is that the table is pretty low for a big guy like me. The weird top-down view I showed in the picture is how I usually see this saw. But I find I don’t mind that too much. I’ve taken to rolling over to the bandsaw on my shop stool and cutting while sitting down. Works great that way, even for a guy with a bad back. Thu, 21 Apr 2022 03:02:04 GMT https://www.lumberjocks.com/reviews/12325 Dave Polaschek Dave Polaschek Face shield that seriously works https://www.lumberjocks.com/reviews/12324 Let’s get to it, I am a safety glasses kind of person. Every face shield that I have purchased, used, acquired, what ever were worthless. They would fog up in about a minute, even without that, you couldn’t see through them, if you routered something, more debris would come around the shield than would hit the floor and they wouldn’t stop a speeding wet napkin without the shield part coming off. Then I went to the doctor’s office for a checkup during the pandemic. My doc had on a face shield that was ingenious so I wrote down the info to get one. Got on their web sight and they have options for welding as well. I have listed some of the things I don’t like about shields. Did I mention that you cannot see through them, they don’t stop much and sawdust goes right around them to search for and get into your eyes, and they are uncomfortable to wear? Now for these shields -They are made to wear all day, they are for professional trades – Lincoln Electric makes weldersThey are crystal clear, you forget the mask is downMine does not fog upIt wraps around your face enough that the dust and debris from the router doesn’t come around the shield. I don’t know if you can get these across the pond, but I hope so. Wed, 20 Apr 2022 14:48:30 GMT https://www.lumberjocks.com/reviews/12324 dbray45 dbray45 GRIT Automation - Dust collection automation system https://www.lumberjocks.com/reviews/12323 I’ve newly installed this system and haven’t been using it long, but I wanted to put out some information about what I think is a game changer for my shop, and maybe for yours too. I found GRIT Automation randomly while surfing through Facebook woodworking groups. Actually, their name came up as a reply to a post, nothing more. I did a little research on GRIT and actually had a hard time finding out much about them. It turns out they’re a newer company, but they’ve been working to perfect their product for about 5 years. I got in contact with them and we started an excellent dialog about their dust collection automation system. They use a proprietary mesh network that allows all their devices to communicate cleanly and quickly, and what’s best is that they communicate wirelessly over the system’s own ad hoc network. What this means is you don’t need to have internet access in your shop for this system to work! Their user interface is simple, despite the amount of background technology at work, and even folks that aren’t particularly tech savvy shouldn’t have a problem setting up. And, while the system can be accessed through a smart phone or tablet, once it’s set up you don’t need to use your phone for anything. Turn on a machine, or flip a manual switch, and the correct gates open and the DC turns on. That’s it! The blast gate actuators are servo driven and the brackets are designed to fit multiple sized gates, with replaceable arms to make it all fit right. Install for my small shop (12 gates, 10 triggers, Mag Switch for the DC, air filter controller, and Hub) took about one long day to complete. Once I got a feel for the process, it went very smoothly and, keep in mind, I was integrating this into an already established DC ducting system so there was extra work just getting access to some parts of my system. I’ve got my shop DC divided into three zones, which means each tool has a zone gate and a local gate at the tool that needs to be actuated when the tool is in use. This used to mean walking back and forth to a couple gates for each tool. Now, I just turn on the tools, the right gates open, and the DC turns on after a preset delay to allow the gates to be fully opened. When the tool is powered off, the DC turns off after another preset delay to allow the lines to clear. The current gates stay open so there is no more action needed if I want to use the same tool again, as in multiple cuts. This is great for the miter saw! Another thing I really like about their system is that it was designed not to need additional wall receptacles to power the system. The machine triggers feature an inline plug, so it plugs into the wall and the tool plugs into it. What’s more, there is a low voltage power take off from all the triggers to allow you to daisy chain together several devices and power them all…again, without an additional receptacle. And since the system communicates wirelessly, the devices daisy chained together don’t have to be associated with each other at all. So Trigger A and Gate A don’t have to be physically connected. The system uses a central hub to communicate. The hub can also be used to lock out everything associated with the system as a safety. The user interface looks and acts like an app, but it actually a web portal that you save to your phone or tablet for access to the various menus for set up and configuration. Each device within the system can be configured with various different criteria. Triggers can be associated to more than one gate allowing for local gate control as well as zone control for each tool or trigger. There are configurations for DC on/off delay to allow gates to open before the DC powers up, or lines to clear before turning off. There are also various other customizable features to make the system do what you want it to do. While it’s technical, it’s also very well laid out and easy to understand. The one piece that I needed help on was integrating the Mag Switch into my Oneida Supercell. I reached out to GRIT and they contacted me by FaceTime and walked me through the entire process while I did it…which took all of about 5 minutes, minus the friendly chit chat. GRIT offers both Machine Triggers as well as Manual Triggers so, if you want to have a gate just for a shop clean up hose that’s not associated with any specific tool, you don’t have to open the app to turn it on, rather just flip a manual switch (which can also be carried as a wireless switch on your belt or apron) and you’ll be ready to sweep the shop. The system is designed to be scalable and can include multiple Dust Collectors and a variety of other devices such as a particulate sensor that automates your shop air filter, a variety of different sized blast gates, 110v 220v 220v50a and 3 Phase triggers and controllers are all available, and the system can be expanded to include RFID access and tracking. I understand this RFID is being used by a couple Universities for their shops, and would also be useful for large or industrial shops I’d imagine. For those that ARE more tech savvy, you can set up machine maintenance intervals and warnings, and there is a full suite of analytics to show how much and how often machines are being used. You can track users via RFID and allow or restrict their access to specific machines. I created a couple videos and posted them on YouTube if you’d like to see more about it. Unboxing and DC discussion – https://youtu.be/w0nmFWDueH8Install and Setup video – https://youtu.be/xuJiZCarYWg On a personal note, I’ve had several discussions with the folks at GRIT and they clearly know what they’re doing. They’re knowledgable about their own product, of course, but they’re actually real woodworkers who are passionate and understand how a shop actually works. I’m told they’re working on more whole-shop integration devices and I expect to see more from them in the future! If you want to check them out, more info is available at GRITautomation.com Sat, 16 Apr 2022 20:19:08 GMT https://www.lumberjocks.com/reviews/12323 RyanGi RyanGi Found this "2 years later". https://www.lumberjocks.com/reviews/12322 I turn pens and some of them are segmented which usually means they are made of dispiriting materials that don’t like to stick to each other, like this layered laminate and wood or aluminum. I forgot that a couple of years ago I did a little experiment to see which did the best job, CA, wood glue, jb weld, and 5 min epoxy. Found it in a drawer and gave them a try just out of curiosity. One swipe with the scraper and they all came right off except the JB Weld. I can’t even get it off with a hammer and 3/4” chisel! It’s really more “bonded” than glued. Draw your own conclusions. YMMV No, I’m tired and not going to reorient the picture. That is all. Mon, 11 Apr 2022 04:15:58 GMT https://www.lumberjocks.com/reviews/12322 Andybb Andybb Amana Countersink Drills… https://www.lumberjocks.com/reviews/12321 Boys and Girls, I am trying to prevent writer’s cramp by abbreviating the mouthful name from Amana Tool 55156 Carbide Tipped 82 Degree Countersink with Tapered Drill and Adjustable Depth Stop with No-Thrust BB, 3/8 D x 5/64 Drill D x 1/4 Inch Quick Release Hex SHK to the title. If you profess to that infamous puzzling quote by ”The Pottzy” ,well duckie another one of your gotta have it do dads that well,i dont gotta have.sorry but ill pass on this one ! but i do appreciate your effort to inform us ! - pottzyou should block your ears if you decide to read further. I have had my fair share of countersink drill bits, ranging from the bargain basement HSS,one step up, loosely bought carbide tipped,to a great set of carbide tipped with tapered drill bits (self-fitted) (even though the box is shop made). I came across these bits when I was ordering some small router bits from Tools Today. They are definitely not cheap, but usually, nor is the timber that you are just about to deface to screw, without ”screwing” it up. Like most other countersinks, they have a simple allen key mechanism for adjusting the drill bit depth, however, at the other end of that key,there is a different gauge to control the actual depth of the countersink, If you choose your purchase carefully, you can order the gizmo with a tapered drill bit for no extra charge. The collar spins freely and will stop rotating as soon as it comes into contact with the timber surface setting the exact depth of the pre-set countersink without disfiguring the work surface. Now these features may not inspire anyone that isn’t discerning about what and how they screw and prefer to chant the snafu mantra and if you happen to visit my workshop, feel free to help yourself to my freebies, by the exit door. PS. For all you Fe$tool tragics, they’re also distributed in CENTROTEC shafts, so 99.999937% of your tight arsed ”buddies” would never need to pinch them. Keep safe, jocks... and your jocks, safe! Wed, 06 Apr 2022 02:18:51 GMT https://www.lumberjocks.com/reviews/12321 LittleBlackDuck LittleBlackDuck Wanted a washable filter for my WEN 3410 shop filter https://www.lumberjocks.com/reviews/12320 I recently upgraded to a new whole shop air filter, the old one I had was too noisy and I wasn’t sure how effective it really was. Bought the attractively priced WEN 3410 model, installed it and turned it on, overall it’s pretty mild sound wise, even at the highest speed. The remote is a great way to interact with the unit, and having a timer you can set and walk away knowing it will turn itself off after an hour, or two or three is great. After a couple of weeks, I noticed the outer filter was filling up pretty quick, started looking for replacements. I was dismayed that there wasn’t a washable filter option by WEN, shot them an email, after a couple of weeks, hadn’t heard back from them, so I started looking online. The filter in this unit is an odd size, 16 5/8” x 9 5/8” x 1 1/2”, so ordering was limited to having a custom size made. Air Filters dot com had a straight forward process for ordering custom sizes, I didn’t see a need for a carbon filter since the original this is to replace is rated for 5 microns. The one thing I didn’t like was nowhere on the ordering page did it indicate what the filtering capacity is, so I called them and was told it is rated at a MERV 5 rating, which if I’m reading the charts correctly is good for 3.0 to 10.0 microns. I wasn’t sure how close of tolerance they would make this filter, so I ordered it 1/8” smaller both in width and height, they had options on the thickness of 1”, 2” or even thicker, I went with the 2” thick. I’m impressed at how exact they sized it, it is just a bit loose in the unit, I’m planning to add a bit of weather stripping to snug it up a bit. For this size filter, the price was around $25, they shipped from Alabama to my California address for $9.95, and with tax I ended up paying about $37 plus change. I received an email indicating they had made the unit and they were going to embed a link for tracking, but something went wrong there, ordered on a Saturday, got it delivered the following Sunday. I will be curious about who fast it fills up and how washing it will work, my main objection to the factory filters was sending them to the landfill, just doesn’t seem right to throw the filters in the garbage. If you end up ordering one for yourself, go ahead and order it at exact size, I’m sure it will fit just fine. Mon, 04 Apr 2022 04:37:25 GMT https://www.lumberjocks.com/reviews/12320 bobfromsanluis bobfromsanluis Kobalt Compact sliding 7-1/4-in 10 Amps Single Bevel Sliding Compound Corded Miter Saw https://www.lumberjocks.com/reviews/12319 Project I’m on is in attic. Long walk w/many stairs. I have a 15+ year old Hitachi 10” compound slide but it weighs almost 70 lbs so I bought lil jimmy who weighs in at 23 lbs. Big difference. Only cutting one bys so it’s perfect. Plugged in, pulled trigger and it started. Paid 200. 2 years ago same was $130. Oh well. Nice to have a lightweight saw to carry to jobs. I cut crown flat and I’d use it to cut crown. Surprisingly accurate Tue, 22 Mar 2022 00:37:21 GMT https://www.lumberjocks.com/reviews/12319 1thumb 1thumb Cubitron Experiences https://www.lumberjocks.com/reviews/12318 After reading about the Cubitron, I had to try it out on my 5 inch ROS. I bought a multi grit pack and used it on a recent project where I was finishing sanded plywood with a water based finish. The Good These disks really do an aggressive job at sanding. The remove wood very quickly. The disks last a long time and remain sharp for a long time. The grit remains sharp and the disks hold up well with no tearing. Even these 3M Cubitron disks with all the holes allow good dust collection. I have not tried the 3M Extract mesh type disks but suspect that they are even better with dust collection. The Not as Good The fact that the disks and grit remain sharp after sanding awhile also has a down side. I generally use a 220 disk for sanding between finishing coats. Normally, with other disk brands, they have lost some sharpness and do a good job at just smoothing the surface for the next coat. With the Cubitron, I found that the 220 disk removed too much of the finish. I tried using the 320 but still was not happy. I went back to my Klingspor Gold 220 and it worked better for me. I would buy more of the Cubitron especially for sanding before finishing but am having difficulty finding it in smaller quantities. Mon, 21 Mar 2022 14:15:37 GMT https://www.lumberjocks.com/reviews/12318 Redoak49 Redoak49 Every shop needs a workbench brush https://www.lumberjocks.com/reviews/12317 I know you are probably thinking that this is silly thing to write a review about. Keep reading and I will attempt to change your mind. I haven’t had a brush in my shop for many years. I always used the shop vac to infrequently take care of the accumulated dust on the bench or other flat surfaces around the shop. Usually, that meant picking up everything I didn’t want to get sucked into the hose. Cleaning dust off plans, books, or other pieces of paper was even worse since the paper would get sucked into the inlet. It was always a chore so, like many other odious activities, it didn’t get done. Sure I would sweep the floor or vacuum it, but the other dust collecting surfaces in the shop would be neglected. As I’m upgrading and re-organizing the shop I decided that the shop dust needed to be attended to more often. So I started looking for a good workbench brush. Of course there are plenty of brushes that would work fine. In fact, if you only take one thing away from this review here’s what it should be: Every shop should have a good workbench brush Now on to the particulars of this review. I happened to find a brush that is made in the USA, on Amazon of all places. It is made by Old City Unlimited out of Philadelphia, PA. It has a nice thick handle, fine bristles that won’t scratch finishes. Overall measurements: 13” long and 4” high. There is a leather loop for hanging it on the side of the bench. The bristles are horse hair and the handle is beech. It isn’t inexpensive at $25 but the quality is much better than the cheap stuff you can get at the BORG. Plus the manufacturer is a small US based company. It has become part of my routine to reach for it to brush wood chips or dust off the bench, table saw, router, or anything that has dust on it. The bristles also make it great for getting into cracks and crevices like drawer pulls on the metal cabinets. I give it a 5-star rating because it is well made, very useful, and I expect that it will last for years to come making it a very good investment. Take a look at it and give it a try Sun, 20 Mar 2022 12:53:04 GMT https://www.lumberjocks.com/reviews/12317 EarlS EarlS Good Entry in the Dado Market https://www.lumberjocks.com/reviews/12316 I did a video review and full test of the new Sawstop dado blade. I plan to do a long term update to see how the blade and case holds up. As of today, it’s a 4-1/2 star blade. Video review… https://youtu.be/M5ILYtXDK1M I have dozens of dado blades in the shop and can compare this dado stack to the Dewalt 7670, Infinity Dadonator, Whiteside Plus by Dimar, Forrest Dado King, Ridge Carbide North Woods Dado Master, among others. Hope it proves useful. Sat, 19 Mar 2022 16:07:04 GMT https://www.lumberjocks.com/reviews/12316 pintodeluxe pintodeluxe Dont Buy https://www.lumberjocks.com/reviews/12315 This insert was terrible. I purchased the insert so I could cut a 45 Deg. angle cut with my saw and not open the kerf on my factory insert. I used a thick piece of wood as scrap over the blade to keep the insert in place while I lifted the blade to make the first kerf. The insert lifted approximately a 1/32 of an inch when I lifted the blade, and the Infinity product touched the blade setting off the brake and destoning the blade. I talked to Infinite’s customer service and they were incredibly arrogant and not willing to help in any way (the worst customer service I have ever encountered) That’s jut one of the issues. It’s also a terrible fit on the new 2022 industrial model. STAY AWAY Wed, 16 Mar 2022 14:44:51 GMT https://www.lumberjocks.com/reviews/12315 Winstondryfly Winstondryfly

20

The Banter Shop:Monil Patel

The Banter Shop

Hard to find time to meet up with your actual friends? Adulting is more challenging than you thought? Then listen to these three friends getting together in the shop to talk about things going on around us. We will provide our unique perspective on pop culture, relationships, career choices, music, sports, tech and so much more! Get your weekly dose of entertainment from the boys in the shop!

Download Castbox to bring I Am All In with Scott Patterson and thousands of other podcasts with you on the road. Listen to I Am All In with Scott Patterson anywhere, anytime across all your devices. You can join the #more than a shop discussion in the community and get more insights about more than a shop podcasts.

Download from Google Play
Download from App Store